Battery Chargers
Review Battery Chargers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Battery Chemistry | Number of Cells | Current - Charging | Programmable Features | Fault Protection | Charge Current - Max | Battery Pack Voltage | Voltage - Supply (Max) | Interface | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTC4000EGN#PBFIC BATT CHG IRON PHOSPHAT 28SSOP |
122 |
|
Datasheet | PowerPath™ | 28-SSOP (0.154", 3.90mm Width) | Tube | Active | Lithium Iron Phosphate | - | Constant - Programmable | Timer | Reverse Current | - | - | 60V | - | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 28-SSOP |
|
LTC4012IUF-3#PBFIC BATT CHG MULTI-CHEM 20QFN |
216 |
|
Datasheet | PowerPath™ | 20-WFQFN Exposed Pad | Tube | Active | Multi-Chemistry | - | Constant - Programmable | - | Over Voltage, Reverse Current | - | - | 28V | - | -40°C ~ 125°C (TA) | - | - | Surface Mount | 20-QFN (4x4) |
|
LT1512CS8#PBFIC BATT CHG MULT-CHEM 1CEL 8SOIC |
986 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Multi-Chemistry | 1 | Constant - Programmable | - | - | 1A | - | 25V | - | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SO |
|
LTC4006EGN-6#PBFIC BATT CHG LI-ION 2CELL 16SSOP |
1,357 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tube | Active | Lithium Ion | 2 | Constant - Programmable | Timer | - | - | 8.4V | 28V | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-SSOP |
|
LT3651EUHE-4.2#PBFIC BATT CHG LI-ION 1CELL 36QFN |
225 |
|
Datasheet | - | 36-WFQFN Exposed Pad | Tube | Active | Lithium Ion/Polymer | 1 | Constant - Programmable | Current, Timer | Over Temperature | 4A | 4.2V | 32V | - | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 36-QFN (5x6) |
|
LTC4007EGN#PBFIC BATT CHG LI-ION 3-4CEL 24SSOP |
1,852 |
|
Datasheet | - | 24-SSOP (0.154", 3.90mm Width) | Tube | Active | Lithium Ion | 3 ~ 4 | Constant - Programmable | Timer | - | - | 16.8V | 28V | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 24-SSOP |
|
|
LT1510-5CGN#PBFIC BATT CHG MULTI-CHEM 16SSOP |
186 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tube | Active | Multi-Chemistry | - | Constant - Programmable | - | Over Voltage | 1.5A | 20V (Max) | 28V | - | 0°C ~ 70°C (TA) | - | - | Surface Mount | 16-SSOP |
|
LTC4013IUFD#PBFIC BATT CHG MULT-CHEM 6CEL 28QFN |
182 |
|
Datasheet | - | 28-WFQFN Exposed Pad | Tube | Active | Multi-Chemistry | 6 | Constant - Programmable | Current | Over Current, Over Temperature | - | - | 60V | - | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 28-QFN (4x5) |
|
LT1513CR#PBFIC BAT CHG MULT-CHEM 1CL D2PAK-7 |
753 |
|
Datasheet | - | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | Tube | Active | Multi-Chemistry | 1 | Constant - Programmable | - | - | 2A | 20V (Max) | 25V | - | 0°C ~ 125°C (TJ) | - | - | Surface Mount | DDPAK-7 |
|
LT1510IS#PBFIC BATT CHG MULTI-CHEM 16SOIC |
474 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tube | Active | Multi-Chemistry | - | Constant - Programmable | - | Over Voltage | 1.5A | 20V (Max) | 28V | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-SO |
Frequently Asked Questions
What are Battery Chargers components used for?
Battery Chargers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Battery Chargers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Battery Chargers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
