Battery Chargers
Review Battery Chargers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Battery Chemistry | Number of Cells | Current - Charging | Programmable Features | Fault Protection | Charge Current - Max | Battery Pack Voltage | Voltage - Supply (Max) | Interface | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MP2770GL-0000-PI2C-CONTROLLED, 6A, 1-CELL SWITC |
4,943 |
|
Datasheet | - | 18-PowerVFQFN | Tape & Reel (TR) | Active | Lithium Ion/Polymer | 1 | Constant - Programmable | Current, Timer, Voltage | Over Current, Over Temperature, Over-Under Voltage, Short Circuit | 6A | 4.45V (Max) | 16V | I2C, USB | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 18-QFN (3x4) |
|
|
MP2702GRP-0000-Z26V INPUT, 1A LINEAR CHARGER WIT |
2,908 |
|
Datasheet | - | 10-VQFN | Tape & Reel (TR) | Active | Multi-Chemistry | 1 ~ 2 | Constant - Programmable | Current, Timer, Voltage | Over Temperature, Over Voltage, Short Circuit | 1A | 3.6V, 4.1V, 4.2V, 4.35V, 4.5V | 14.4V | - | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 10-QFN (2x2.5) |
|
|
MP2703GRP-XXXX-Z26V INPUT, 1A LINEAR CHARGERWITH |
3,698 |
|
Datasheet | - | 10-VFDFN | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 10-QFN (2x2.5) |
|
|
MP2700GC-0000-Z1-CELL TO 2-CELL, 26V INPUT, 1A |
3,744 |
|
Datasheet | - | 8-UFBGA, WLCSP | Tape & Reel (TR) | Active | Multi-Chemistry | 1 ~ 2 | Constant - Programmable | Current, Timer, Voltage | Over Temperature, Over Voltage, Short Circuit | 1A | 3.6V, 4.1V, 4.2V, 4.35V, 4.5V | 14.4V | - | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 8-WLCSP (1.05x1.6) |
|
MP2670DQ-LF-ZIC BATT CHG LI-ION 1CELL 10QFN |
4,047 |
|
Datasheet | - | 10-VFDFN Exposed Pad | Tape & Reel (TR) | Active | Lithium Ion/Polymer | 1 | Constant - Programmable | - | Over Current, Over Voltage | 1A | 4.475V (Max) | 5.5V | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 10-QFN (3x3) |
|
|
MP2635AGR-Z2A SINGLE CELL SWITCHING CHARGER |
4,114 |
|
Datasheet | MP | 24-PowerVFQFN | Tape & Reel (TR) | Active | Lithium Ion/Polymer | 1 | Constant - Programmable | Current, Timer, Voltage | Over Current, Over Voltage | 2A | 4.35V (Max) | 6V | - | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 24-QFN (4x4) |
|
|
MP26029GN-0000-ZSTAND-ALONE 1A LINEAR LI-ION BAT |
3,628 |
|
Datasheet | MP | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | Tape & Reel (TR) | Active | Lithium Ion/Polymer | 1 | Constant - Programmable | Current, Timer | Over Temperature, Over Voltage | 1A | 4.5V | 6.05V | - | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 8-SOIC-EP |
|
|
MP2702GRP-0000-P26V INPUT, 1A LINEAR CHARGER WIT |
2,832 |
|
Datasheet | - | 10-VQFN | Tape & Reel (TR) | Active | Multi-Chemistry | 1 ~ 2 | Constant - Programmable | Current, Timer, Voltage | Over Temperature, Over Voltage, Short Circuit | 1A | 9V (Max) | 14V | - | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 10-QFN (2x2.5) |
|
|
MP2703GRP-XXXX-P26V INPUT, 1A LINEAR CHARGERWITH |
2,732 |
|
Datasheet | - | 10-VFDFN | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 10-QFN (2x2.5) |
|
|
MP2663GC-0000-Z5.2V SYSTEM,500MA,I2C-CONTROLLED |
3,059 |
|
Datasheet | MP | 9-WFBGA, WLCSP | Tape & Reel (TR) | Active | Lithium Ion/Polymer | 1 | Constant - Programmable | Current, Timer, Voltage | Over Current, Over Temperature, Over Voltage, Short Circuit | 500mA | 4.545V (Max) | 5.5V | I2C | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 9-WLCSP (1.55x1.55) |
Frequently Asked Questions
What are Battery Chargers components used for?
Battery Chargers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Battery Chargers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Battery Chargers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
