Logic Output Optoisolators
Review Logic Output Optoisolators Optocouplers, Optoisolators components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Number of Channels | Inputs - Side 1/Side 2 | Voltage - Isolation | Common Mode Transient Immunity (Min) | Input Type | Output Type | Current - Output / Channel | Data Rate | Propagation Delay tpLH / tpHL (Max) | Rise / Fall Time (Typ) | Voltage - Forward (Vf) (Typ) | Current - DC Forward (If) (Max) | Voltage - Supply | Grade | Qualification | Operating Temperature | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IS900G6PIN SCHMITT TRIGGER, SINGLE OPT |
2,990 |
|
Datasheet | IS900 | 6-DIP (0.400", 10.16mm) | Tube | Active | 1 | 1/0 | 5000Vrms | - | DC | Tri-State | 50 mA | 1MHz | - | 100ns, 100ns | 1.15V | 60mA | 16V | - | - | -55°C ~ 100°C | Through Hole | 6-DIP |
|
|
H11L1VSM6PIN SCHMITT TRIGGER, SINGLE OPT |
2,990 |
|
Datasheet | H11L1V | 6-SMD, Gull Wing | Tube | Active | 1 | 1/0 | 5000Vrms | - | DC | - | 50 mA | 1MHz | - | 100ns, 100ns | 1.15V | 60mA | 16V | - | - | -55°C ~ 100°C | Surface Mount | 6-SMD |
|
|
H11L4G6PIN SCHMITT TRIGGER, SINGLE OPT |
2,840 |
|
Datasheet | H11L4 | 6-DIP (0.400", 10.16mm) | Tube | Active | 1 | 1/0 | 5300Vrms | - | DC | Tri-State | 50 mA | 1MHz | 6µs, 3µs | 100ns, 50ns | 1.5V (Max) | 50mA | 3V ~ 15V | - | - | -25°C ~ 85°C | Through Hole | 6-DIP |
|
|
6N137VSMT&R8PIN LOGIC OUTPUT, HIGH SPEED OP |
890 |
|
Datasheet | 6N137 | 8-SMD, Gull Wing | Tape & Reel (TR) | Active | 1 | 1/0 | 5000Vrms | 5kV/µs | DC | Open Collector | 50 mA | 10Mbps | 75ns, 75ns | 40ns, 10ns | 1.4V | 50mA | 7V | - | - | -40°C ~ 85°C | Surface Mount | 8-SMD |
|
|
H11L1VSMT&R6PIN SCHMITT TRIGGER, SINGLE OPT |
579 |
|
Datasheet | H11L1V | 6-SMD, Gull Wing | Tape & Reel (TR) | Active | 1 | 1/0 | 5000Vrms | - | DC | - | 50 mA | 1MHz | - | 100ns, 100ns | 1.15V | 60mA | 16V | - | - | -55°C ~ 100°C | Surface Mount | 6-SMD |
|
|
ICPLM6015PIN HIGH SPEED, HALF PITCH, OPT |
3,000 |
|
Datasheet | ICPLM601 | 6-SOIC (0.173", 4.40mm Width), 5 Leads | Tape & Reel (TR) | Active | 1 | 1/0 | 3750Vrms | 5kV/µs | DC | Open Collector, Schottky Clamped | 50 mA | 10Mbps | 100ns, 100ns | 40ns, 10ns | 1.45V | 50mA | 7V | - | - | -40°C ~ 85°C | Surface Mount | - |
|
|
ICPL2631G8 PIN HIGH SPEED, LOGIC OUTPUT, |
1,576 |
|
Datasheet | ICPL2631 | 8-DIP (0.400", 10.16mm) | Tube | Active | 2 | 2/0 | 5000Vrms | 10kV/µs | Logic | Open Collector | 50 mA | 10Mbps | 100ns, 100ns | 40ns, 10ns | 1.4V | 20mA | 7V | - | - | -40°C ~ 100°C | Through Hole | 8-DIP |
|
|
ICPL2631SMT&R8 PIN HIGH SPEED, LOGIC OUTPUT, |
830 |
|
Datasheet | ICPL2631 | 8-SMD, Gull Wing | Tape & Reel (TR) | Active | 2 | 2/0 | 5000Vrms | 10kV/µs | Logic | Open Collector | 50 mA | 10Mbps | 100ns, 100ns | 40ns, 10ns | 1.4V | 20mA | 7V | - | - | -40°C ~ 100°C | Surface Mount | 8-SMD |
|
|
ICPL0631SMT&R8 PIN HIGH SPEED SOIC SM ONLY |
1,993 |
|
Datasheet | ICPL0631 | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | 2 | 2/0 | 3750Vrms | 10kV/µs | Logic | Open Collector | 50 mA | 10Mbps | 100ns, 100ns | 40ns, 10ns | 1.4V | 20mA | 7V | - | - | -40°C ~ 100°C | Surface Mount | 8-SOP |
|
ICPL2601SMT&ROPTOISOLATOR 2.5KV OPN COLL 8SMD |
1,046 |
|
Datasheet | - | 8-SMD, Gull Wing | Tape & Reel (TR) | Active | 1 | 1/0 | 2500Vrms | 1kV/µs | DC | Open Collector, Schottky Clamped | 25 mA | 10Mbps | 75ns, 75ns | - | 1.55V | 20mA | 7V | - | - | 0°C ~ 70°C | Surface Mount | 8-SMD Gull Wing |
Frequently Asked Questions
What are Logic Output Optoisolators components used for?
Logic Output Optoisolators components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Logic Output Optoisolators part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Logic Output Optoisolators parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
