Flip Flops
Review Flip Flops Logic components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Function | Type | Output Type | Number of Elements | Number of Bits per Element | Clock Frequency | Max Propagation Delay @ V, Max CL | Trigger Type | Current - Output High, Low | Voltage - Supply | Current - Quiescent (Iq) | Input Capacitance | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
100331QCXIC FF D-TYPE TRPL 1BIT 28PLCC |
920 |
|
Datasheet | - | 28-LCC (J-Lead) | Bulk | Obsolete | Master Reset | D-Type | Complementary | 3 | 1 | 400 MHz | - | Positive Edge | - | -4.2V ~ -5.7V | - | - | 0°C ~ 85°C (TC) | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
|
74ACTQ18823SSCIC FF D-TYPE DUAL 9BIT 56SSOP |
850 |
|
Datasheet | 74ACTQ | 56-BSSOP (0.295", 7.50mm Width) | Tube | Obsolete | Reset | D-Type | Tri-State, Non-Inverted | 2 | 9 | 100 MHz | 9ns @ 5V, 50pF | Positive Edge | 24mA, 24mA | 4.5V ~ 5.5V | 80 µA | 4.5 pF | -40°C ~ 85°C (TA) | - | - | Surface Mount | 56-SSOP |
|
74F794PCIC FF D-TYPE SNGL 8BIT 20DIP |
1,512 |
|
Datasheet | 74F | 20-DIP (0.300", 7.62mm) | Tube | Obsolete | Standard | D-Type | Tri-State, Non-Inverted | 1 | 8 | 90 MHz | 7ns @ 5V, 50pF | Positive Edge | 15mA, 64mA | 4.5V ~ 5.5V | 65 mA | - | 0°C ~ 70°C (TA) | - | - | Through Hole | 20-PDIP |
|
|
100331QIIC FF D-TYPE TRPL 1BIT 28PLCC |
2,019 |
|
Datasheet | - | 28-LCC (J-Lead) | Tube | Obsolete | Master Reset | D-Type | Complementary | 3 | 1 | 400 MHz | - | Positive Edge | - | -4.2V ~ -5.7V | - | - | -40°C ~ 85°C (TC) | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
|
|
100351QCXIC FF D-TYPE SNGL 6BIT 28PLCC |
2,096 |
|
Datasheet | - | 28-LCC (J-Lead) | Bulk | Obsolete | Master Reset | D-Type | Complementary | 1 | 6 | 375 MHz | - | Positive Edge | - | -4.2V ~ -5.7V | - | - | 0°C ~ 85°C (TC) | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
|
|
100351QCIC FF D-TYPE SNGL 6BIT 28PLCC |
1,910 |
|
Datasheet | - | 28-LCC (J-Lead) | Tube | Obsolete | Master Reset | D-Type | Complementary | 1 | 6 | 375 MHz | - | Positive Edge | - | -4.2V ~ -5.7V | - | - | 0°C ~ 85°C (TC) | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
|
MC100EP35MNR4GIC FF JK TYPE SNGL 1BIT 8DFN |
9,784 |
|
Datasheet | - | 8-VFDFN Exposed Pad | Bulk | Obsolete | Reset | JK Type | Differential | 1 | 1 | 3 MHz | - | Positive Edge | - | -3V ~ -5.5V | 50 mA | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-DFN (2x2) |
|
MM74C73NIC FF JK TYPE DUAL 1BIT 14DIP |
9,182 |
|
Datasheet | 74C | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | Set(Preset) and Reset | JK Type | Complementary | 2 | 1 | 11 MHz | 110ns @ 10V, 50pF | Negative Edge | 8mA, 8mA | 3V ~ 15V | 60 µA | 5 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-DIP |
|
9111DCR-S FLIP-FLOP |
879 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | Standard | D-Type | Complementary | 1 | 1 | - | - | Positive Edge | - | - | - | - | 0°C ~ 75°C | - | - | Through Hole | 14-CDIP |
|
MM74C175ND FLIP-FLOP |
1,800 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Bulk | Active | Standard | D-Type | Complementary | 1 | 4 | 10 MHz | 110ns @ 10V, 50pF | Positive Edge | - | 3V ~ 15V | 300 µA | 10 pF | -55°C ~ 125°C | - | - | Through Hole | 16-PDIP |
Frequently Asked Questions
What are Flip Flops components used for?
Flip Flops components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Flip Flops part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Flip Flops parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
