Flip Flops
Review Flip Flops Logic components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Function | Type | Output Type | Number of Elements | Number of Bits per Element | Clock Frequency | Max Propagation Delay @ V, Max CL | Trigger Type | Current - Output High, Low | Voltage - Supply | Current - Quiescent (Iq) | Input Capacitance | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
84001022AOCTAL D-TYPE EDGE-TRIGGERED FLIP |
1,141 |
|
Datasheet | 54ALS | 20-CLCC | Tube | Active | Standard | D-Type | Tri-State, Inverted | 1 | 8 | 22 MHz | 24ns @ 5V, 50pF | Positive Edge | 1mA, 12mA | 4.5V ~ 5.5V | 30 mA | - | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
JM38510/65308BEAQUADRUPLE D-TYPE FLIP-FLOPS WITH |
4,449 |
|
Datasheet | 54HC | 16-CDIP (0.300", 7.62mm) | Tube | Active | Master Reset | D-Type | Complementary | 1 | 4 | 60 MHz | 26ns @ 6V, 50pF | Positive Edge | 5.2mA, 5.2mA | 2V ~ 6V | 8 µA | 3 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-CDIP |
|
SN74ABT273DBIC FF D-TYPE SNGL 8BIT 20SSOP |
1,823 |
|
Datasheet | 74ABT | 20-SSOP (0.209", 5.30mm Width) | Bulk | Active | Master Reset | D-Type | Non-Inverted | 1 | 8 | 150 MHz | 6.8ns @ 5V, 50pF | Positive Edge | 32mA, 64mA | 4.5V ~ 5.5V | 30 mA | 7 pF | -40°C ~ 85°C (TA) | - | - | Surface Mount | 20-SSOP |
|
|
JM38510/05152BEACMOS DUAL J-K MASTER-SLAVE FLIP- |
2,770 |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Tube | Active | Set(Preset) and Reset | JK Type | Complementary | 2 | 1 | 24 MHz | 90ns @ 15V, 50pF | Positive Edge | 6.8mA, 6.8mA | 3V ~ 18V | 20 µA | 5 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-CDIP |
|
JM38510/30109BEADUAL J-K POSITIVE-EDGE-TRIGGERED |
3,380 |
|
Datasheet | 54LS | 16-CDIP (0.300", 7.62mm) | Tube | Active | Set(Preset) and Reset | JK Type | Complementary | 2 | 1 | 33 MHz | 40ns @ 5V, 15pF | Positive Edge | 4mA | 4.5V ~ 5.5V | 8 mA | - | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-CDIP |
|
SN74LVTH374NSIC FF D-TYPE SNGL 8BIT 20SO |
3,589 |
|
Datasheet | 74LVTH | 20-SOIC (0.209", 5.30mm Width) | Tube | Active | Standard | D-Type | Tri-State, Non-Inverted | 1 | 8 | 150 MHz | 4.5ns @ 3.3V, 50pF | Positive Edge | 32mA, 64mA | 2.7V ~ 3.6V | 5 mA | 3 pF | -40°C ~ 85°C (TA) | - | - | Surface Mount | 20-SO |
|
|
CD54HC175F3AHIGH SPEED CMOS LOGIC QUAD D-TYP |
2,805 |
|
Datasheet | 54HC | 16-CDIP (0.300", 7.62mm) | Tube | Active | Master Reset | D-Type | Complementary | 1 | 4 | 35 MHz | 30ns @ 6V, 50pF | Positive Edge | 5.2mA, 5.2mA | 2V ~ 6V | 8 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-CDIP |
|
|
CD40174BF3AIC FF D-TYPE SNGL 6BIT 16CDIP |
2,260 |
|
Datasheet | 4000B | 16-CDIP (0.300", 7.62mm) | Tube | Active | Standard | D-Type | Non-Inverted | 1 | 6 | 16 MHz | 100ns @ 15V, 50pF | Positive Edge | 6.8mA, 6.8mA | 3V ~ 18V | 20 µA | 5 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-CDIP |
|
|
SN74HC273ANIC FF D-TYPE SNGL 8BIT 20DIP |
1,884 |
|
Datasheet | 74HC | 20-DIP (0.300", 7.62mm) | Bulk | Active | Master Reset | D-Type | Non-Inverted | 1 | 8 | 72 MHz | 25ns @ 6V, 50pF | Positive Edge | 5.2mA, 5.2mA | 2V ~ 6V | 8 µA | 3 pF | -40°C ~ 85°C (TA) | - | - | Through Hole | 20-PDIP |
|
|
CY54FCT377CTLMBOCTAL D-TYPE FLIP-FLOPS WITH ENA |
1,641 |
|
Datasheet | 54FCT | 20-CLCC | Tube | Active | Standard | D-Type | Non-Inverted | 1 | 8 | - | 5.5ns @ 5V, 50pF | Positive Edge | 12mA, 32mA | 4.5V ~ 5.5V | 200 µA | 5 pF | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
Frequently Asked Questions
What are Flip Flops components used for?
Flip Flops components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Flip Flops part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Flip Flops parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
