Flip Flops
Review Flip Flops Logic components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Function | Type | Output Type | Number of Elements | Number of Bits per Element | Clock Frequency | Max Propagation Delay @ V, Max CL | Trigger Type | Current - Output High, Low | Voltage - Supply | Current - Quiescent (Iq) | Input Capacitance | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
CD74HC175EIC FF D-TYPE SNGL 4BIT 16DIP |
813 |
|
Datasheet | 74HC | 16-DIP (0.300", 7.62mm) | Tube | Active | Master Reset | D-Type | Complementary | 1 | 4 | 35 MHz | 30ns @ 6V, 50pF | Positive Edge | 5.2mA, 5.2mA | 2V ~ 6V | 8 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-PDIP |
|
SN74AC374NIC FF D-TYPE SNGL 8BIT 20DIP |
3,282 |
|
Datasheet | 74AC | 20-DIP (0.300", 7.62mm) | Bulk | Active | Standard | D-Type | Tri-State, Non-Inverted | 1 | 8 | 155 MHz | 9.5ns @ 5V, 50pF | Positive Edge | 24mA, 24mA | 2V ~ 6V | 4 µA | 4.5 pF | -40°C ~ 85°C (TA) | - | - | Through Hole | 20-PDIP |
|
CD74FCT273EIC FF D-TYPE SNGL 8BIT 20DIP |
758 |
|
Datasheet | 74FCT | 20-DIP (0.300", 7.62mm) | Tube | Active | Master Reset | D-Type | Non-Inverted | 1 | 8 | 70 MHz | 7ns @ 5V, 50pF | Positive Edge | 15mA, 48mA | 4.75V ~ 5.25V | 8 µA | - | 0°C ~ 70°C (TA) | - | - | Through Hole | 20-PDIP |
|
CD74AC174EIC FF D-TYPE SNGL 6BIT 16DIP |
174 |
|
Datasheet | 74AC | 16-DIP (0.300", 7.62mm) | Tube | Active | Master Reset | D-Type | Non-Inverted | 1 | 6 | 95 MHz | 18.9ns @ 5V, 50pF | Positive Edge | 24mA, 24mA | 1.5V ~ 5.5V | 8 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-PDIP |
|
CD74AC273EIC FF D-TYPE SNGL 8BIT 20DIP |
1,787 |
|
Datasheet | 74AC | 20-DIP (0.300", 7.62mm) | Bulk | Active | Master Reset | D-Type | Non-Inverted | 1 | 8 | 114 MHz | 12.3ns @ 5V, 50pF | Positive Edge | 24mA, 24mA | 1.5V ~ 5.5V | 8 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 20-PDIP |
|
|
CD74ACT574EIC FF D-TYPE SNGL 8BIT 20DIP |
1,827 |
|
Datasheet | 74ACT | 20-DIP (0.300", 7.62mm) | Tube | Active | Standard | D-Type | Tri-State, Non-Inverted | 1 | 8 | 110 MHz | 11.2ns @ 5V, 50pF | Positive Edge | 24mA, 24mA | 4.5V ~ 5.5V | 8 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 20-PDIP |
|
SN74ABT16374ADLIC FF D-TYPE DUAL 8BIT 48SSOP |
2,118 |
|
Datasheet | 74ABT | 48-BSSOP (0.295", 7.50mm Width) | Tube | Active | Standard | D-Type | Tri-State, Non-Inverted | 2 | 8 | 150 MHz | 4.7ns @ 5V, 50pF | Positive Edge | 32mA, 64mA | 4.5V ~ 5.5V | 2 mA | 3.5 pF | -40°C ~ 85°C (TA) | - | - | Surface Mount | 48-SSOP |
|
SN74LS107ADIC FF JK TYPE DUAL 1BIT 14SOIC |
4,967 |
|
Datasheet | 74LS | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | Reset | JK Type | Complementary | 2 | 1 | 45 MHz | 20ns @ 5V, 15pF | Negative Edge | 400µA, 8mA | 4.75V ~ 5.25V | 6 mA | - | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SOIC |
|
SN74LVC1G80YZPRIC FF D-TYPE SNGL 1BIT 5DSBGA |
645 |
|
Datasheet | 74LVC | 5-XFBGA, DSBGA | Tape & Reel (TR) | Active | Standard | D-Type | Inverted | 1 | 1 | 160 MHz | 4.5ns @ 5V, 50pF | Positive Edge | 32mA, 32mA | 1.65V ~ 5.5V | 10 µA | 3.5 pF | -40°C ~ 85°C (TA) | - | - | Surface Mount | 5-DSBGA (1.4x0.9) |
|
SN74HC377NSRIC FF D-TYPE SNGL 8BIT 20SO |
833 |
|
Datasheet | 74HC | 20-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Active | Standard | D-Type | Non-Inverted | 1 | 8 | 64 MHz | 27ns @ 6V, 50pF | Positive Edge | 5.2mA, 5.2mA | 2V ~ 6V | 8 µA | 3 pF | -40°C ~ 85°C (TA) | - | - | Surface Mount | 20-SO |
Frequently Asked Questions
What are Flip Flops components used for?
Flip Flops components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Flip Flops part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Flip Flops parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
