Flip Flops
Review Flip Flops Logic components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Function | Type | Output Type | Number of Elements | Number of Bits per Element | Clock Frequency | Max Propagation Delay @ V, Max CL | Trigger Type | Current - Output High, Low | Voltage - Supply | Current - Quiescent (Iq) | Input Capacitance | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MC74VHCT574AMELBUS DRIVER, AHCT/VHCT SERIES |
4,000 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MC74HCT74ADR2IC FF D-TYPE DUAL 1BIT 14SOIC |
3,476 |
|
Datasheet | 74HCT | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Set(Preset) and Reset | D-Type | Complementary | 2 | 1 | 30 MHz | 24ns @ 5V, 50pF | Positive Edge | 4mA, 4mA | 4.5V ~ 5.5V | 2 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
NC7SZ175L6X-L22175IC FF D-TYPE SNGL 1BIT 6MICROPAK |
3,424 |
|
Datasheet | 7SZ | 6-UFDFN | Tape & Reel (TR) | Obsolete | Master Reset | D-Type | Non-Inverted | 1 | 1 | 175 MHz | 4ns @ 5V, 50pF | Positive Edge | 32mA, 32mA | 1.65V ~ 5.5V | 1 µA | 3 pF | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-MicroPak |
|
74LVC574ADTR2GIC FF D-TYPE SNGL 8BIT 20TSSOP |
1,873 |
|
Datasheet | 74LVC | 20-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | Standard | D-Type | Tri-State, Non-Inverted | 1 | 8 | 200 MHz | 7ns @ 3.3V, 50pF | Positive Edge | 24mA, 24mA | 1.65V ~ 3.6V | 10 µA | 5 pF | -40°C ~ 125°C (TA) | - | - | Surface Mount | 20-TSSOP |
|
MC74HC74AFL1IC FF D-TYPE DUAL 1BIT 14SOEIAJ |
44,115 |
|
Datasheet | 74HC | 14-SOIC (0.209", 5.30mm Width) | Bulk | Active | Set(Preset) and Reset | D-Type | Complementary | 2 | 1 | 35 MHz | 17ns @ 6V, 50pF | Positive Edge | 5.2mA, 5.2mA | 2V ~ 6V | 2 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
74LVC374ADTR2GIC FF D-TYPE SNGL 8BIT 20TSSOP |
2,095 |
|
Datasheet | 74LVC | 20-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | Standard | D-Type | Tri-State, Non-Inverted | 1 | 8 | 150 MHz | 7ns @ 3.3V, 50pF | Positive Edge | 24mA, 24mA | 1.65V ~ 3.6V | 10 µA | 5 pF | -40°C ~ 125°C (TA) | - | - | Surface Mount | 20-TSSOP |
|
MC74ACT175DR2IC FF D-TYPE SNGL 4BIT 16SOIC |
17,500 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MC74LVX74DIC FF D-TYPE DUAL 1BIT 14SOIC |
15,770 |
|
Datasheet | 74LVX | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Set(Preset) and Reset | D-Type | Complementary | 2 | 1 | 85 MHz | 13.2ns @ 3.3V, 50pF | Positive Edge | 4mA, 4mA | 2V ~ 3.6V | 2 µA | 4 pF | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
MC74HC74AFR1IC FF D-TYPE DUAL 1BIT 14SOEIAJ |
13,000 |
|
Datasheet | 74HC | 14-SOIC (0.209", 5.30mm Width) | Bulk | Active | Set(Preset) and Reset | D-Type | Complementary | 2 | 1 | 35 MHz | 17ns @ 6V, 50pF | Positive Edge | 5.2mA, 5.2mA | 2V ~ 6V | 2 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
MC74F174DFLIP FLOP D TYPE BUS INTERFACE P |
12,678 |
|
Datasheet | - | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Frequently Asked Questions
What are Flip Flops components used for?
Flip Flops components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Flip Flops part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Flip Flops parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
