Instrumentation, Op Amps, Buffer Amps
Explore Instrumentation, Op Amps, Buffer Amps parts from multiple manufacturers, with model information, availability, datasheets and technical specifications for engineering and purchasing.
For parts that are not shown in the list, send the manufacturer part number, quantity or BOM to JIEXIN Electronics. Our team can assist with availability checks and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD518SHIC OPAMP GP 1 CIRCUIT TO99 |
1,490 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 70V/µs | 12 MHz | - | 120 nA | 2 mV | 5µA | 10 mA | 10 V | 10 V | -55°C ~ 125°C | - | - | Through Hole | TO-99 |
|
HA4-5141/883IC POWER 1 CIRCUIT 20CLCC |
2,547 |
|
Datasheet | - | 20-CLCC | Bulk | Active | Power | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 20-CLCC (8.89x8.89) |
|
LT1230CN#PBFIC OPAMP CFA 4 CIRCUIT 14DIP |
4,764 |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | Current Feedback | 4 | - | 700V/µs | 100 MHz | 100 MHz | 10 µA | 3 mV | 6mA (x4 Channels) | 125 mA | 4 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
_4040251^B.jpg "OPA548T-1G3")
|
OPA548T-1G3IC POWER 1 CIRCUIT TO220-7 |
2,479 |
|
Datasheet | - | TO-220-7 | Tube | Obsolete | Power | 1 | - | 10V/µs | 1 MHz | - | 100 nA | 2 mV | 17mA | 5 A | 8 V | 60 V | -40°C ~ 85°C | - | - | Through Hole | TO-220-7 |
|
8102302HAIC OPAMP JFET 2 CIRCUIT 10CFP |
2,950 |
|
Datasheet | - | 10-CDFF | Bulk | Active | J-FET | 2 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA (x2 Channels) | - | 10 V | 30 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 10-CFP |
|
|
LT1024CN#PBFIC OPAMP GP 2 CIRCUIT 14DIP |
2,825 |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 0.2V/µs | - | - | 30 pA | 20 µV | 380µA (x2 Channels) | - | 2.4 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
LT1230CS#PBFIC OPAMP CFA 4 CIRCUIT 14SO |
2,834 |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 4 | - | 700V/µs | - | 100 MHz | 10 µA | 3 mV | 6mA (x4 Channels) | 125 mA | 4 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
LT1216CS#PBFIC OPAMP GP 4 CIRCUIT 16SO |
4,693 |
|
Datasheet | LT® | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 50V/µs | 23 MHz | - | 420 nA | 250 µV | 4.75mA (x4 Channels) | 50 mA | 2.5 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
|
LT1024ACN#PBFIC OPAMP GP 2 CIRCUIT 14DIP |
1,963 |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 0.2V/µs | - | - | 25 pA | 15 µV | 380µA (x2 Channels) | - | 2.4 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
CLC446AJ-QMLIC OPAMP CFA 1 CIRCUIT |
4,140 |
|
Datasheet | - | - | Bulk | Active | Current Feedback | 1 | - | 2000V/µs | - | 400 MHz | 10 µA | 2 mV | 4.8mA | 48 mA | 6 V | 6 V | -40°C ~ 85°C (TA) | - | - | - | - |
|
HA7-2720-8IC OPAMP GP 1 CIRCUIT 8CERDIP |
4,220 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | - | - | - | 8 nA | 2 mV | 210µA | 5 mA | 45 V | 45 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CERDIP |
_4040208^C.jpg "OPA544TG3")
|
OPA544TG3IC POWER 1 CIRCUIT TO220-5 |
4,400 |
|
Datasheet | - | TO-220-5 | Tube | Obsolete | Power | 1 | - | 8V/µs | 1.4 MHz | - | 15 pA | 1 mV | 12mA | 2 A | 20 V | 70 V | -40°C ~ 85°C | - | - | Through Hole | TO-220-5 |
|
|
HA4-5135/883IC OPAMP GP 1 CIRCUIT 20CLCC |
3,524 |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 1 | - | 0.5V/µs | 600 kHz | - | 4 nA | 75 µV | - | 15 mA | 30 V | 30 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (8.89x8.89) |
|
HA2-2500-2X114OPERATIONAL AMPLIFIER |
4,131 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
AD506KHIC OPAMP JFET 1 CIRCUIT TO99-8 |
2,931 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | Through Hole | TO-99-8 |
|
|
LT1127ACN#PBFIC OPAMP GP 4 CIRCUIT 14DIP |
3,976 |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 11V/µs | 65 MHz | - | 7 nA | 25 µV | 2.6mA (x4 Channels) | - | 8 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
|
TLC2201AMFKBIC CMOS 1 CIRCUIT 20LCCC |
4,672 |
|
Datasheet | - | 20-CLCC | Bulk | Active | CMOS | 1 | Rail-to-Rail | 2.7V/µs | 1.9 MHz | - | 1 pA | 100 µV | 1.1mA | 50 mA | 4.6 V | 16 V | -55°C ~ 125°C | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
AD707TH/883BIC OPAMP GP 1 CIRCUIT TO99-8 |
4,578 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 0.3V/µs | 900 kHz | - | 1.5 nA | 10 µV | 2.5mA | 10 mA | 22 V | 22 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
|
5962-9080801M2AIC OPAMP JFET 2 CIRCUIT 20LCCC |
3,285 |
|
Datasheet | - | 20-CLCC | Bulk | Active | J-FET | 2 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 625µA (x2 Channels) | 80 mA | 7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
5962-9563901MGAIC OPAMP DIFF 1 CIRCUIT TO99-8 |
4,975 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | Differential | 1 | - | 9.5V/µs | - | 3 MHz | - | 20 µV | 2.5mA | 45 mA | 12 V | 36 V | -55°C ~ 125°C | Military | MIL-STD-883 | Through Hole | TO-99-8 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
