Instrumentation, Op Amps, Buffer Amps
Explore Instrumentation, Op Amps, Buffer Amps parts from multiple manufacturers, with model information, availability, datasheets and technical specifications for engineering and purchasing.
For parts that are not shown in the list, send the manufacturer part number, quantity or BOM to JIEXIN Electronics. Our team can assist with availability checks and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMC6462BIN/NOPBLMC6462 DUAL MICROPOWER, RAIL-TO |
3,394 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 0.028V/µs | 50 kHz | - | 0.15 pA | 250 µV | 50µA (x2 Channels) | 75 mA | 3 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 8-PDIP |
|
LT1672CS8#PBFLT1672 - PRECISION RAIL-TO-RAIL |
200 |
|
Datasheet | Over-The-Top® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 25 pA | 200 µV | 1.9µA | 1.5 mA | 2.2 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
OPA2695IDROPA2695 - ULTRA-WIDEBAND, CURREN |
3,670 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
LMH6702MALMH6702 1.7 GHZ, ULTRA LOW DISTO |
14,734 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
LTC6102HVCDD#PBFPRECISION ZERO DRIFT CURRENT SEN |
544 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Bulk | Active | Current Sense | 1 | - | - | 200 kHz | - | 60 pA | 3 µV | 420µA | 1 mA | 5 V | 100 V | 0°C ~ 70°C | - | - | Surface Mount | 8-DFN (3x3) |
|
HA1-2405-7OPERATIONAL AMPLIFIER, 1 FUNC, 1 |
1,794 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
EL8302IUZ-T13IC OPAMP GP 3 CIRCUIT 16QSOP |
25,000 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 3 | Rail-to-Rail | 600V/µs | 200 MHz | 500 MHz | 6 µA | 800 µV | 5.6mA (x3 Channels) | 65 mA | 3 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP |
|
|
EL8302IUZ-T13IC OPAMP GP 3 CIRCUIT 16QSOP |
20,000 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 3 | Rail-to-Rail | 600V/µs | 200 MHz | 500 MHz | 6 µA | 800 µV | 5.6mA (x3 Channels) | 65 mA | 3 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP |
|
LT1991IDD#TRPBFLT1991 - PRECISION DIFFERENCE AM |
6,554 |
|
Datasheet | - | 10-WFDFN Exposed Pad | Bulk | Obsolete | Programmable Gain | 1 | - | 0.12V/µs | 560 kHz | 110 kHz | 2.5 nA | 25 µV | 130µA | 21 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 10-DFN (3x3) |
|
|
LT1996IDD#PBFLT1996 - PRECISION, 100UA GAIN S |
1,210 |
|
Datasheet | * | 10-WFDFN Exposed Pad | Bulk | Obsolete | Programmable Gain | 1 | - | 0.12V/µs | 560 kHz | 38 kHz | 2.5 nA | 25 µV | 130µA | 21 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 10-DFN (3x3) |
|
|
EL5364IUZ-T7IC OPAMP CFA 3 CIRCUIT 16QSOP |
2,000 |
|
Datasheet | EL5364 | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 3 | - | 4200V/µs | - | 600 MHz | 2 µA | 1.5 mV | 3.5mA (x3 Channels) | 140 mA | 5 V | 10 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-QSOP |
|
OP15FN8#PBFOP15 - HIGH PERF JFET OP AMP |
950 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 11V/µs | 5.7 kHz | - | 30 pA | 400 µV | 2.7mA | - | 20 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LT6010ACDD#PBFLT6010 - RAIL-TO-RAIL OUTPUT PRE |
363 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.11V/µs | 350 kHz | - | 2 nA | 20 µV | 260µA | 20 mA | 2.7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-DFN (3x3) |
|
LMH6732MFX/NOPBIC OPAMP CFA 1 CIRCUIT SOT23-6 |
3,000 |
|
Datasheet | - | SOT-23-6 | Bulk | Active | Current Feedback | 1 | - | 2700V/µs | - | 540 MHz | 2 µA | 3 mV | 9mA | 115 mA | 9 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
LT1192CN8#PBFLT1192 - ULTRA HIGH SPEED OA(AV= |
950 |
|
Datasheet | * | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 1 | - | 450V/µs | 350 MHz | - | 500 nA | 200 µV | 32mA | 50 mA | - | - | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LMH6550MA/NOPBLMH6550 400MHZ, DIFFERENTIAL, HI |
2,887 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | Differential | 3000V/µs | - | 400 MHz | 8 µA | 1 mV | 20mA | 75 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2228PAOPA2228 DUAL, WIDE BANDWIDTH, HI |
130 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 11V/µs | 33 MHz | - | 2.5 nA | 10 µV | 3.7mA (x2 Channels) | 45 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OP420HYGeneral Purpose Operational Ampl |
2,261 |
|
Datasheet | - | - | Tube | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
OPA2251PAOPA2251 DUAL, 15V SINGLE-SUPPLY, |
133 |
|
Datasheet | microPOWER™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.01V/µs | 35 kHz | - | 20 nA | 100 µV | 27µA (x2 Channels) | 50 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
LM6142BIMLM6142 DUAL HIGH SPEED/LOW POWER |
310 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 25V/µs | 18 MHz | - | 174 nA | 1.3 mV | 750µA (x2 Channels) | 24 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
