Instrumentation, Op Amps, Buffer Amps
Explore Instrumentation, Op Amps, Buffer Amps parts from multiple manufacturers, with model information, availability, datasheets and technical specifications for engineering and purchasing.
For parts that are not shown in the list, send the manufacturer part number, quantity or BOM to JIEXIN Electronics. Our team can assist with availability checks and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX4202EUKLOW-POWER, OPEN-LOOP BUFFER |
1,243 |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Active | Buffer | 1 | - | 4200V/µs | - | 780 MHz | 800 nA | 1 mV | 2.2mA | 44 mA | 8 V | 11 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
ICL7650CPAIC OPAMP ZER-DRIFT 1CIRC 8DIP |
4,310 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Chopper (Zero-Drift) | 1 | - | 2.5V/µs | 2 MHz | - | 1.5 pA | 700 µV | 1.2mA | - | 4.5 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LA47201L-N-EFOUR CHANNEL BTL POWER AMPLIFIER |
300 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
AD623BNIC AMP INST R-R LP 8DIP |
5,211 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Instrumentation | 1 | Rail-to-Rail | 0.3V/µs | - | 800 kHz | 17 nA | 25 µV | 375µA | - | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
AD8099ACP-R2IC OPAMP VF ULN ULDIST 8LFCSP |
4,588 |
|
Datasheet | - | 8-VFDFN Exposed Pad, CSP | Cut Tape (CT) | Obsolete | Voltage Feedback | 1 | - | 1350V/µs | - | 510 MHz | 6 µA | 100 µV | 15mA | 178 mA | 5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-LFCSP (3x3) |
|
MAX479CPD+IC OPAMP SNGL SUP QUAD 14-DIP |
458 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Discontinued at Digi-Key | General Purpose | 4 | - | 0.04V/µs | 85 kHz | - | 3 nA | 50 µV | 13µA (x4 Channels) | - | 3 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
AD548AQIC OPAMP GP 1 CIRCUIT 8CERDIP |
22,556 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 1.8V/µs | 1 MHz | - | - | - | 170µA | 15 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
UC3178QPIC POWER 2 CIRCUIT 28PLCC |
1,011 |
|
Datasheet | - | 28-LCC (J-Lead) | Tube | Obsolete | Power | 2 | - | 1V/µs | 2 MHz | - | 50 µA | 12 mV | 13mA (x2 Channels) | 450 mA | 3 V | 15 V | 0°C ~ 70°C | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
|
PM156J/883CIC OPAMP JFET 1 CIRCUIT TO99-8 |
448 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 12V/µs | 5 MHz | - | 30 nA | 1 mV | 2mA | 50 mA | 44 V | 44 V | -55°C ~ 125°C | Military | MIL-STD-883 | Through Hole | TO-99-8 |
|
|
CA30063RF/MICROWAVE LIMITING AMPLIFIER |
113 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
AD848JRIC OPAMP GP 1 CIRCUIT 8SOIC |
2,289 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 300V/µs | 175 MHz | - | 3.3 µA | 200 µV | 5.1mA | 32 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TLC25L4BCDIC CMOS 4 CIRCUIT 14SOIC |
3,412 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 4 | Single-Ended | 0.04V/µs | 110 kHz | - | 0.2 pA | 340 µV | 2.7mA (x4 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
AD8002ARMIC OPAMP CF DUAL LP LDIST 8MSOP |
5,876 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Current Feedback | 2 | - | 1200V/µs | - | 600 MHz | 5 µA | 2 mV | 10mA (x2 Channels) | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
|
TLC254BCDIC CMOS 4 CIRCUIT 14SOIC |
1,196 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 4 | Open Drain | 4.5V/µs | 2.2 MHz | - | 0.2 pA | 340 µV | 2.7mA (x4 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
OP43BJIC OPAMP JFET 1 CIRCUIT TO99-8 |
1,087 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | - | - | - | - | - | - | - | 10 V | 40 V | -55°C ~ 125°C (TA) | - | - | Through Hole | TO-99-8 |
|
|
LA47201L-NCARAUDIO AMPLIFIER BTL4CH |
300 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
EL2227CSZIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
223 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 2 | - | 50V/µs | 137 MHz | 115 MHz | 3.4 µA | 200 µV | 4.8mA (x2 Channels) | 180 mA | 5 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
AD8220WARMZ-RLIC INST AMP 1 CIRCUIT 8MSOP |
2,742 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | Rail-to-Rail | 2V/µs | - | 1.5 MHz | 25 pA | 250 µV | 750µA | 15 mA | 4.5 V | 36 V | -40°C ~ 125°C | Automotive | - | Surface Mount | 8-MSOP |
|
TLV2765IPWRIC OPAMP GP 4 CIRCUIT 16TSSOP |
1,122 |
|
Datasheet | - | 16-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.23V/µs | 500 kHz | - | 3 pA | 550 µV | 20µA (x4 Channels) | 10.2 mA | 1.8 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-TSSOP |
|
HFA1412IPIC BUFFER 4 CIRCUIT 14DIP |
154 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | Buffer | 4 | - | 1700V/µs | - | 350 MHz | 1 µA | 2 mV | 5.9mA | 55 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
