Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TPA1286-VS1RIC CHOPPER 1 CIRCUIT 8-MSOP |
2,975 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 1 | Single Ended, Rail-to-Rail | 5V/µs | - | - | 300 pA | 10 µV | 3.8mA | 70 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
|
TPA1286U-VS1RIC CHOPPER 1 CIRCUIT 8-MSOP |
2,868 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 1 | Single Ended, Rail-to-Rail | 5V/µs | - | - | 300 pA | 10 µV | 3.8mA | 70 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
|
TPA1864-SRIC CHOPPER 4 CIRCUIT 14-SOP |
2,457 |
|
Datasheet | TPA186x | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 4 | Push-Pull, Rail-to-Rail | 5V/µs | 6 MHz | - | 100 pA | 30 µV | 1.6mA (x4 Channels) | 150 mA | 4.5 V | 40 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOP |
|
|
TPA1295F-SO1R-SIC CURRENT SENSE 1 CIRCUIT 8-SOP |
3,940 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 20V/µs | - | 500 kHz | 12 µA | 10 µV | 600µA | - | 3 V | 18 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOP |
|
|
TPH2861-DF4R-SIC OPAMP 8GHZ 1 CIR 8-DFN |
2,910 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Standard | 1 | Push-Pull | 2700V/µs | 8 GHz | 2.3 GHz | 23 µA | 200 µV | 19mA | 120 mA | 3.3 V | 5.25 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-DFN (2x2) |
|
|
TPA8304-TS2R-SIC LOGARITHMIC AMPLIFIER 14-TSSO |
3,000 |
|
Datasheet | - | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
TPA3530-SO1RIC CURRENT SENSE 1 CIRCUIT 8-SOP |
4,000 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | Single Ended, Rail-to-Rail | 1.4V/µs | 2.1 MHz | - | 0.1 pA | 150 µV | 900µA | 33 mA | 4.5 V | 16 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOP |
|
|
TPH2503-TRIC OPAMP 1 CIRCUIT SOT-23-6 |
2,779 |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 200V/µs | 120 MHz | 250 MHz | 3 pA | 2 mV | - | 290 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-6 |
|
|
TP2111-TRIC OPAMP 1 CIRCUIT SOT-23-5 |
773 |
|
Datasheet | TP211x | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 0.006V/µs | 10 kHz | - | 1 pA | 100 µV | 600nA | 20 mA | 1.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
LMV358B-VRIC OPAMP 2 CIRCUIT 8-MSOP |
537 |
|
Datasheet | LMV358B | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 0.7V/µs | 1 MHz | - | 1 pA | 2 mV | 80µA (x2 Channels) | 100 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
