Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ALD1726EPALIC OPAMP GP 1 CIRCUIT 8DIP |
4,443 |
|
Datasheet | EPAD® | 8-DIP (0.300", 7.62mm) | Tube | Not For New Designs | General Purpose | 1 | Rail-to-Rail | 0.17V/µs | 400 kHz | - | 0.01 pA | 50 µV | 25µA | 200 µA | 2 V | 10 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
ALD1736SALIC OPAMP GP 1 CIRCUIT 8SOIC |
2,440 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.17V/µs | 400 kHz | - | 10 pA | 400 µV | - | - | 4 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
ALD2702BSALIC CMOS 2 CIRCUIT 8SOIC |
2,489 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 2.8V/µs | 1.5 MHz | - | 1 pA | 5 mV | 2mA | 8 mA | 4 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
ALD2704BSALIC CMOS 2 CIRCUIT 8SOIC |
3,318 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 5V/µs | 2.1 MHz | - | 1 pA | 2 mV | 5mA | 15 mA | 6.5 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
ALD2701BSALIC CMOS 2 CIRCUIT 8SOIC |
1,189 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 1V/µs | 1 MHz | - | 1 pA | 5 mV | 240µA | 1 mA | 2 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
ALD1731ASALIC OPAMP GP 1 CIRCUIT 8SOIC |
2,464 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.7V/µs | 700 kHz | - | 10 pA | 400 µV | - | - | 2 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
ALD1732ASALIC OPAMP GP 1 CIRCUIT 8SOIC |
4,766 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 2.1V/µs | 1.5 MHz | - | 10 pA | 100 µV | - | - | 4 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
ALD1726SALIC OPAMP GP 1 CIRCUIT 8SOIC |
1,809 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.17V/µs | 400 kHz | - | 0.01 pA | 70 µV | 25µA | 200 µA | 2 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
ALD2731PALIC CMOS 2 CIRCUIT 8DIP |
3,659 |
|
Datasheet | EPAD® | 8-DIP (0.300", 7.62mm) | Tube | Active | CMOS | 2 | Rail-to-Rail | 0.7V/µs | 700 kHz | - | 0.01 pA | 1 mV | 240µA (x2 Channels) | 1 mA | 2 V | 10 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
ALD2732PALIC OPAMP GP 2 CIRCUIT 8DIP |
1,107 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 1.9V/µs | 1.5 MHz | - | 10 pA | 2 mV | - | - | 4 V | 10 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
