Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ACPL-C79A-000EIC OPAMP ISOLATION 1 CIRC 8SO |
1,228 |
|
Datasheet | - | 8-SOIC (0.268", 6.81mm Width) | Tube | Active | Isolation | 1 | Differential | - | - | 200 kHz | 100 nA | 600 µV | 13mA | 11 mA | 4.5 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 8-SO Stretched |
|
HCPL-788J-000EIC OPAMP ISOLATION 1 CIRC 16SO |
1,921 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | Isolation | 1 | - | - | - | 30 kHz | - | 3 mV | 20mA | 20 mA | 4.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SO |
|
|
ACPL-C87AT-000EIC OPAMP ISOLATION 1 CIRC 8SO |
1,426 |
|
Datasheet | - | 8-SOIC (0.268", 6.81mm Width) | Tube | Active | Isolation | 1 | - | - | - | 100 kHz | 1 nA | 300 µV | 10.5mA | 30 mA | 3 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO Stretched |
|
|
ACPL-C87AT-500EIC OPAMP ISOLATION 1 CIRC 8SO |
4,085 |
|
Datasheet | - | 8-SOIC (0.268", 6.81mm Width) | Tape & Reel (TR) | Active | Isolation | 1 | - | - | - | 100 kHz | 1 nA | 300 µV | 10.5mA | 30 mA | 3 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO Stretched |
|
|
ACPL-C78A-060EIC OPAMP ISOLATION 1 CIRC 8SO |
350 |
|
Datasheet | - | 8-SOIC (0.268", 6.81mm Width) | Tube | Active | Isolation | 1 | Differential | - | - | 100 kHz | - | 300 µV | 11mA | 18.6 mA | 4.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO Stretched |
|
ACPL-782T-500EIC OPAMP ISOLATION 1 CIRC 8DIPGW |
2,054 |
|
Datasheet | R²Coupler™ | 8-SMD, Gull Wing | Tape & Reel (TR) | Active | Isolation | 1 | Differential | - | - | 100 kHz | 500 nA | 300 µV | 10.86mA | 18.6 mA | 4.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-DIP Gull Wing |
|
ACNT-H87A-000EIC OPAMP ISOLATION 1 CIRC 8SO |
1,591 |
|
Datasheet | - | 8-SOIC (0.535", 13.60mm Width) | Tube | Active | Isolation | 1 | Differential | - | - | 100 kHz | 1.5 nA | 9.9 mV | 10.5mA | 30 mA | 3 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 8-SO Stretched |
|
|
ACPL-C78A-000EIC OPAMP ISOLATION 1 CIRC 8SO |
566 |
|
Datasheet | - | 8-SOIC (0.268", 6.81mm Width) | Tube | Active | Isolation | 1 | Differential | - | - | 100 kHz | - | 300 µV | 11mA | 18.6 mA | 4.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO Stretched |
|
|
HCPL-788JIC OPAMP ISOLATION 1 CIRC 16SO |
1,009 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | Isolation | 1 | - | - | - | 30 kHz | - | 3 mV | 20mA | 20 mA | 4.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SO |
|
HCPL-7800IC OPAMP ISOLATION 1 CIRC 8DIP |
362 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Isolation | 1 | - | - | - | 100 kHz | 500 nA | 300 µV | 10.9mA | 16 mA | 4.5 V | 5.5 V | -40°C ~ 85°C | - | - | Through Hole | 8-DIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
