Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
5962-9755701HXAIC OPAMP ISOLATION 1 CIRC 8DIPGW |
4,442 |
|
Datasheet | - | 8-SMD, Gull Wing | Tube | Active | Isolation | 1 | Differential | - | - | 100 kHz | 570 nA | 600 µV | 10.7mA | 11 mA | 4.5 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 8-DIP Gull Wing |
|
ACPL-785EIC OPAMP ISOLATION 1 CIRC 8DIP |
2,015 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | Isolation | 1 | - | - | - | 100 kHz | 570 nA | - | 10.7mA | 11 mA | 4.5 V | 5.5 V | -55°C ~ 125°C | - | - | Through Hole | 8-DIP |
|
|
ACPL-785E-200IC OPAMP ISOLATION 1 CIRC 8DIP |
1,090 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | Isolation | 1 | - | - | - | 100 kHz | 570 nA | - | 10.7mA | 11 mA | 4.5 V | 5.5 V | -55°C ~ 125°C | - | - | Through Hole | 8-DIP |
|
5962-9755701EPAIC OPAMP ISOLATION 1 CIRC 8DIP |
2,406 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | Isolation | 1 | Differential | - | - | 100 kHz | 570 nA | 600 µV | 10.7mA | 11 mA | 4.5 V | 5.5 V | -55°C ~ 125°C | - | - | Through Hole | 8-DIP |
|
|
5962-9755701EPCIC OPAMP ISOLATION 1 CIRC 8DIP |
3,759 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Isolation | 1 | Differential | - | - | 100 kHz | 570 nA | 600 µV | 10.7mA | 11 mA | 4.5 V | 5.5 V | -55°C ~ 125°C | - | - | Through Hole | 8-DIP |
|
|
ACPL-785E-300IC OPAMP ISOLATION 1 CIRC 8DIP |
2,578 |
|
Datasheet | - | 8-SMD, Gull Wing | Bulk | Active | Isolation | 1 | - | - | - | 100 kHz | 570 nA | - | 10.7mA | 11 mA | 4.5 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 8-DIP |
|
|
5962-9755701EXAHERMETIC OPTOCOUPLER |
4,612 |
|
Datasheet | - | 8-SMD, Gull Wing | Tray | Active | Isolation | 1 | Differential | - | - | 100 kHz | 570 nA | 600 µV | 10.7mA | 11 mA | 4.5 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 8-DIP Gull Wing |
|
|
HCPL-7800#500IC OPAMP ISOLATION 1 CIRC 8DIPGW |
4,387 |
|
Datasheet | - | 8-SMD, Gull Wing | Tape & Reel (TR) | Discontinued at Digi-Key | Isolation | 1 | - | - | - | 100 kHz | 500 nA | 300 µV | 10.9mA | 16 mA | 4.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DIP Gull Wing |
|
|
HCPL-7840#560IC OPAMP ISOLATION 1 CIRC 8DIPGW |
1,311 |
|
Datasheet | - | 8-SMD, Gull Wing | Tape & Reel (TR) | Discontinued at Digi-Key | Isolation | 1 | Differential | - | - | 100 kHz | 500 nA | 300 µV | 10.86mA | 15.5 mA | 4.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DIP Gull Wing |
|
|
HCPL-7520-560IC CURR SENSE 1 CIRCUIT 8DIPGW |
4,397 |
|
Datasheet | - | 8-SMD, Gull Wing | Tape & Reel (TR) | Discontinued at Digi-Key | Current Sense | 1 | - | - | - | 100 kHz | 600 nA | 600 µV | 11.7mA | 16 mA | 4.5 V | 5.5 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-DIP Gull Wing |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
