Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
EL5364IUZ-T7R5289IC OPAMP CFA 3 CIRCUIT 16QSOP |
9,744 |
|
Datasheet | EL5364 | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 3 | Push-Pull | 4200V/µs | - | 600 MHz | 2 µA | 1.5 mV | 3.5mA (x3 Channels) | 140 mA | 5 V | 12 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-QSOP |
|
EL5166IW-T7IC OPAMP CFA 1 CIRCUIT SOT23-6 |
77,870 |
|
Datasheet | - | SOT-23-6 | Bulk | Obsolete | Current Feedback | 1 | - | 6000V/µs | - | 1.4 GHz | 8.5 µA | 500 µV | 8.5mA | 200 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
EL5146CNIC VOLTAGE FEEDBACK 1 CIRC 8DIP |
28,626 |
|
Datasheet | EL5146 | 8-DIP (0.300", 7.62mm) | Bulk | Active | Voltage Feedback | 1 | Rail-to-Rail | 200V/µs | 60 MHz | 100 MHz | 2 nA | 25 mV | 7mA | 90 mA | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
EL2142CS-T7IC OPAMP DIFF 1 CIRCUIT 8SOIC |
9,812 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Differential | 1 | - | 400V/µs | 200 MHz | 150 MHz | 6 µA | 10 mV | 11mA | 60 mA | 6 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
EL5146CSZIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
9,225 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 200V/µs | 60 MHz | 100 MHz | 2 nA | 15 mV | 7mA | 120 mA | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
EL5167IC-T7AIC OPAMP CFA 1 CIRCUIT SC70-5 |
750 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Bulk | Obsolete | Current Feedback | 1 | - | 6000V/µs | - | 1.4 GHz | 8.5 µA | 500 µV | 8.5mA | 200 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
EL2227CS-T13IC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
666 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 50V/µs | 137 MHz | 115 MHz | 3.4 µA | 200 µV | 4.8mA (x2 Channels) | 180 mA | 5 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
EL2141CS-T7IC OPAMP DIFF 1 CIRCUIT 8SOIC |
385 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Differential | 1 | Differential | 800V/µs | 400 MHz | 150 MHz | 6 µA | 10 mV | 11mA | 60 mA | 6 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
EL5166IW-T7AIC OPAMP CFA 1 CIRCUIT SOT23-6 |
250 |
|
Datasheet | - | SOT-23-6 | Bulk | Obsolete | Current Feedback | 1 | - | 6000V/µs | - | 1.4 GHz | 8.5 µA | 500 µV | 8.5mA | 200 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
|
EL5444CUIC OPAMP VFB 4 CIRCUIT 16QSOP |
1,149 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 4 | Rail-to-Rail | 200V/µs | 60 MHz | 100 MHz | 2 nA | 25 mV | 7mA (x4 Channels) | 120 mA | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
