Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA2128PAIC INST AMP 2 CIRCUIT 16DIP |
2,697 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Bulk | Active | Instrumentation | 2 | - | 4V/µs | 200 kHz | 1.3 MHz | 2 nA | 25 µV | 1.4mA (x2 Channels) | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 16-PDIP |
|
4127JGIC LOGARITHMIC 2 CIRCUIT 24CDIP |
3,832 |
|
Datasheet | - | 24-CDIP (0.600", 15.24mm) | Tube | Obsolete | Logarithmic | 2 | - | - | - | 90 kHz | 40 nA | 5 mV | 20mA | 5 mA | 28 V | 32 V | -10°C ~ 70°C | - | - | Through Hole | 24-CDIP |
|
3584JMIC OPAMP GP 1 CIRCUIT TO3-8 |
2,384 |
|
Datasheet | - | TO-3-8 | Tube | Obsolete | General Purpose | 1 | - | 150V/µs | 20 MHz | - | 20 pA | 3 mV | 6.5mA | 15 mA | 140 V | 300 V | 0°C ~ 70°C | - | - | Through Hole | TO-3-8 |
|
OPA2251PAG4IC OPAMP GP 2 CIRCUIT 8DIP |
100 |
|
Datasheet | microPOWER™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.01V/µs | 35 kHz | - | 20 nA | 100 µV | 27µA (x2 Channels) | 50 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
_4040233^C.jpg "OPA453TA-1")
|
OPA453TA-1OPA453 80V, 50MA OPERATIONAL AMP |
4,868 |
|
Datasheet | - | TO-220-7 Formed Leads | Bulk | Active | General Purpose | 1 | - | 38V/µs | 7.5 MHz | - | 7 pA | 1 mV | 5.5mA | 50 mA | 20 V | 80 V | -40°C ~ 125°C | - | - | Through Hole | TO-220-7 |
|
OPA404KPG4IC OPAMP GP 4 CIRCUIT 14DIP |
2,101 |
|
Datasheet | Difet® | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 35V/µs | 6.4 MHz | - | 1 pA | 260 µV | 9mA (x4 Channels) | 10 mA | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
OPA637AUOPA637 PRECISION HIGH-SPEED DIFE |
2,108 |
|
Datasheet | Difet® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | - | 135V/µs | 80 MHz | - | 2 pA | 130 µV | 7mA | 45 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA541BMOPA541 HIGH POWER MONOLITHIC OPE |
4,287 |
|
Datasheet | - | TO-3-8 | Bulk | Active | Power | 1 | - | 10V/µs | 1.6 MHz | - | 4 pA | 100 µV | 20mA | 10 A | 10 V | 80 V | -25°C ~ 85°C | - | - | Through Hole | 3-TO-CAN |
|
|
OPA2541SMOPA2541 DUAL HIGH POWER OPERATIO |
2,102 |
|
Datasheet | - | TO-3-8 | Bulk | Active | General Purpose | 2 | - | 8V/µs | 1.6 MHz | - | 15 pA | 1 mV | 40mA (x2 Channels) | 7 A | 20 V | 80 V | -55°C ~ 125°C | - | - | Through Hole | TO-3-8 |
|
OPA4343EAIC CMOS 4 CIRCUIT 16SSOP |
1,783 |
|
Datasheet | MicroAmplifier™ | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | CMOS | 4 | Rail-to-Rail | 6V/µs | 5.5 MHz | - | 0.2 pA | 2 mV | 850µA (x4 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
