Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
KM4100IC8TR3IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
22,500 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | Rail-to-Rail | 150V/µs | 90 MHz | 260 MHz | 3 µA | 1.4 mV | 4.2mA | 60 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
KM4101IC8TR3IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
12,498 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | Rail-to-Rail | 150V/µs | 90 MHz | 260 MHz | 3 µA | 1.6 mV | 3.9mA | 60 mA | 2.7 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
KM4212IC8IC OPAMP GP 2 CIRCUIT 8SOIC |
1,900 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | - | 9V/µs | 4 MHz | 7.3 MHz | 90 µA | 1 mV | - | 4 mA | 2.5 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
KM4270IM8TR3IC VOLTAGE FEEDBACK 2 CIRC 8MSOP |
119,185 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | Voltage Feedback | 2 | Rail-to-Rail | 9V/µs | 2 MHz | 4.3 MHz | 90 nA | 1.5 mV | 160µA (x2 Channels) | 30 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
KM4101IT6TR3IC OPAMP VFB 1 CIRCUIT SOT23-6 |
6,000 |
|
Datasheet | - | SOT-23-6 | Bulk | Active | Voltage Feedback | 1 | Rail-to-Rail | 150V/µs | 90 MHz | 260 MHz | 3 µA | 1.6 mV | 3.9mA | 60 mA | 2.7 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
FHP3230IM8XIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
7,295 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 110V/µs | 60 MHz | 170 MHz | 1.8 µA | 1 mV | 2.5mA (x2 Channels) | 100 mA | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
KM4120IT6TR3IC OPAMP VFB 1 CIRCUIT SOT23-6 |
106,030 |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | Rail-to-Rail | 50V/µs | 33 MHz | 75 MHz | 1.2 µA | 5 mV | 505µA | 15 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
LM2904MXLM2904-N LOW POWER DUAL OPERATIO |
105,320 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | - | - | 1 MHz | - | 45 nA | 2 mV | 800µA (x2 Channels) | 40 mA | 3 V | 26 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
KM4110IT5TR3IC OPAMP VFB 1 CIRCUIT SOT23-5 |
26,224 |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Active | Voltage Feedback | 1 | Rail-to-Rail | 50V/µs | 28 MHz | 65 MHz | 1.2 µA | 5 mV | 505µA | 25 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
LM2902MXIC OPAMP GP 4 CIRCUIT 14SOIC |
117,280 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | - | - | 1 MHz | - | 45 nA | 2 mV | 1.5mA | 30 mA | 3 V | 32 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
