Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA549SIC OPAMP POWER 1 CIRC 11PWRPACK |
2,999 |
|
Datasheet | - | TO-220-11, Power Package | Tube | Active | Power | 1 | - | 9V/µs | 900 kHz | - | 100 nA | 1 mV | 26mA | 10 A | 8 V | 60 V | -40°C ~ 85°C | - | - | Through Hole | 11-Power Package |
|
OPA549TIC POWER 1 CIRCUIT TO220-11 |
712 |
|
Datasheet | - | TO-220-11 Formed Leads | Tube | Active | Power | 1 | - | 9V/µs | 900 kHz | - | 100 nA | 1 mV | 26mA | 10 A | 8 V | 60 V | -40°C ~ 85°C | - | - | Through Hole | TO-220-11 |
|
|
OPA2544TIC OPAMP GP 2 CIRCUIT TO220-11 |
206 |
|
Datasheet | - | TO-220-11 Formed Leads | Tube | Active | General Purpose | 2 | - | 8V/µs | 1.4 MHz | - | 15 pA | 1 mV | 22mA (x2 Channels) | 4 A | 20 V | 70 V | -40°C ~ 85°C | - | - | Through Hole | TO-220-11 |
|
INA116UAIC INST AMP 1 CIRCUIT 16SOIC |
103 |
|
Datasheet | Difet® | 16-SOIC (0.295", 7.50mm Width) | Bulk | Not For New Designs | General Purpose | 1 | - | 0.8V/µs | - | 800 kHz | 0.003 pA | 500 µV | 1mA | 12 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
BUF634FKTTTIC BUFFER 1 CIRC DDPAK/TO263-5 |
1,008 |
|
Datasheet | - | TO-263-6, D2PAK (5 Leads + Tab), TO-263BA | Tape & Reel (TR) | Not For New Designs | Buffer | 1 | - | 2000V/µs | - | 180 MHz | 5 µA | 30 mV | 15mA | 250 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | TO-263 (DDPAK-5) |
|
LMH6401IRMZTIC VARIABLE GAIN 1 CIRC 16UQFN |
199 |
|
Datasheet | - | 16-UFQFN | Tape & Reel (TR) | Active | Variable Gain | 1 | Differential | 18200V/µs | 500 MHz | 4.5 GHz | - | - | 69mA | - | 4 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-UQFN (3x3) |
|
OPA627AU/2K5IC OPAMP GP 1 CIRCUIT 8SOIC |
573 |
|
Datasheet | Difet® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | - | 55V/µs | 16 MHz | - | 2 pA | 130 µV | 7mA | 45 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
ISO122JU/1KIC OPAMP ISOLATION 1 CIRC 8SOIC |
1,146 |
|
Datasheet | - | 28-SOIC (0.295", 7.50mm Width), 8 Leads | Tape & Reel (TR) | Active | Isolation | 1 | - | 2V/µs | - | 50 kHz | - | 20 mV | 5mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
PGA206UAIC INST AMP 1 CIRCUIT 16SOIC |
372 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Bulk | Active | Instrumentation | 1 | - | 25V/µs | - | 5 MHz | 2 pA | 1 mV | 12.4mA | 17 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
|
OPA637AUIC OPAMP GP 1 CIRCUIT 8SOIC |
217 |
|
Datasheet | Difet® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 135V/µs | 80 MHz | - | 2 pA | 130 µV | 7mA | 45 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
