Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV2472QDRQ1IC CMOS 2 CIRCUIT 8SOIC |
3,582 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA (x2 Channels) | 35 mA | 2.7 V | 6 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
|
OPA2277UAE4IC OPAMP GP 2 CIRCUIT 8SOIC |
3,477 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | 0.8V/µs | 1 MHz | - | 4 nA | 20 µV | 790µA (x2 Channels) | 35 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2277UAG4IC OPAMP GP 2 CIRCUIT 8SOIC |
1,651 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | 0.8V/µs | 1 MHz | - | 4 nA | 20 µV | 790µA (x2 Channels) | 35 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLE2022IPIC OPAMP GP 2 CIRCUIT 8DIP |
4,824 |
|
Datasheet | Excalibur™ | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | - | 0.65V/µs | 2.8 MHz | - | 35 nA | 150 µV | 550µA (x2 Channels) | 30 mA | 4 V | 40 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
LM6132AIM/NOPBIC OPAMP GP 2 CIRCUIT 8SOIC |
2,170 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 14V/µs | 11 MHz | - | 125 nA | 1.7 mV | 390µA (x2 Channels) | 3.5 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
LMP7708MAX/NOPBIC OPAMP GP 2 CIRCUIT 8SOIC |
3,763 |
|
Datasheet | LMP® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 5.9V/µs | 15 MHz | - | 0.2 pA | 37 µV | 1.5mA (x2 Channels) | 86 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
INA253A1IPWRIC CURR SENSE 1 CIRCUIT 20TSSOP |
1,676 |
|
Datasheet | Zero-Drift | 20-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 2.4V/µs | - | 350 kHz | 90 µA | - | 1.8mA | - | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 20-TSSOP |
|
|
INA253A3IPWRIC CURR SENSE 1 CIRCUIT 20TSSOP |
4,092 |
|
Datasheet | Zero-Drift | 20-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 2.4V/µs | - | 350 kHz | 90 µA | - | 1.8mA | - | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 20-TSSOP |
|
OPA653IDRBRIC OPAMP JFET 1 CIRCUIT 8SON |
2,153 |
|
Datasheet | - | 8-VDFN Exposed Pad | Tape & Reel (TR) | Obsolete | J-FET | 1 | - | 2675V/µs | - | 500 MHz | 10 pA | 1 mV | 32mA | 70 mA | 7 V | 13 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SON (3x3) |
|
LMH6504MMIC VARIABLE GAIN 1 CIRC 8VSSOP |
1,095 |
|
Datasheet | LMH® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Variable Gain | 1 | - | 1500V/µs | - | 150 MHz | 1.4 µA | - | 11mA | 80 mA | 7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
