Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA132UAE4IC OPAMP GP 1 CIRCUIT 8SOIC |
3,532 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 20V/µs | 8 MHz | - | 5 pA | 500 µV | 4mA | 40 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA132UAG4IC OPAMP GP 1 CIRCUIT 8SOIC |
4,270 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 20V/µs | 8 MHz | - | 5 pA | 500 µV | 4mA | - | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLV2474IPWPRIC CMOS 4 CIRCUIT 14HTSSOP |
4,877 |
|
Datasheet | - | 14-PowerTSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA (x4 Channels) | 35 mA | 2.7 V | 6 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-HTSSOP |
|
TLC2254QDREPIC OPAMP GP 4 CIRCUIT 14SOIC |
1,004 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.12V/µs | 210 kHz | - | 1 pA | 200 µV | 160µA (x4 Channels) | 50 mA | 4.4 V | 16 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 14-SOIC |
|
LMC6464AINIC CMOS 4 CIRCUIT 14DIP |
2,502 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | 0.028V/µs | 50 kHz | - | 0.15 pA | 250 µV | 90µA (x4 Channels) | 75 mA | 3 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 14-PDIP |
|
OPA2695IDRIC OPAMP CFA 2 CIRCUIT 8SOIC |
1,404 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | Differential | 2900V/µs | 1.1 GHz | 1.1 GHz | 20 µA | 300 µV | 25.8mA (x2 Channels) | 120 mA | 3.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLE2022ACPG4IC OPAMP GP 2 CIRCUIT 8DIP |
2,512 |
|
Datasheet | Excalibur™ | 8-DIP (0.300", 7.62mm) | Tube | Discontinued at Digi-Key | General Purpose | 2 | - | 0.65V/µs | 2.8 MHz | - | 33 nA | 120 µV | 550µA (x2 Channels) | 30 mA | 4 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
OPA277PAG4IC OPAMP GP 1 CIRCUIT 8DIP |
3,350 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 0.8V/µs | 1 MHz | - | 500 pA | 20 µV | 790µA | 35 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LMP8640HVMK-F/NOPBIC CURR SENSE 1CIRC SOT23-THIN |
4,427 |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | 1.8V/µs | 450 kHz | - | 13 µA | 900 µV | 2.3mA | - | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-THIN |
|
OPA4992QDRQ1AUTOMOTIVE QUAD 40-V 10.6-MHZ |
1,203 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 4 | Single Ended, Rail-to-Rail | 32V/µs | 10.6 MHz | - | 10 pA | 210 µV | 2.4mA (x4 Channels) | 65 mA | 2.7 V | 40 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
