Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA209AIDRIC OPAMP GP 1 CIRCUIT 8SOIC |
3,331 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 6.4V/µs | 18 MHz | - | 1 nA | 35 µV | 2.2mA | 65 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OPA4170AQPWRQ1IC OPAMP GP 4 CIRCUIT 14TSSOP |
3,569 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.4V/µs | 1.2 MHz | - | 8 pA | 250 µV | 110µA (x4 Channels) | 20 mA | 2.7 V | 36 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-TSSOP |
|
INA159AIDGKTG4IC OPAMP DIFF 1 CIRCUIT 8VSSOP |
3,814 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | Differential | 1 | - | 15V/µs | - | 1.5 MHz | - | 100 µV | 1.1mA | 60 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
OPA2683IDCNRIC OPAMP CFA 2 CIRCUIT SOT23-8 |
4,272 |
|
Datasheet | - | SOT-23-8 | Tape & Reel (TR) | Active | Current Feedback | 2 | Differential | 540V/µs | 200 MHz | - | 3 µA | 1.5 mV | 1.88mA (x2 Channels) | 150 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-8 |
|
|
THS4061CDG4IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
4,920 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 400V/µs | - | 180 MHz | 3 µA | 2.5 mV | 7.8mA | 115 mA | 9 V | 33 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
LMP7716MMIC OPAMP GP 2 CIRCUIT 8HVSSOP |
1,457 |
|
Datasheet | LMP® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 11.5V/µs | 17 MHz | - | 0.1 pA | 10 µV | 1.3mA (x2 Channels) | 66 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
|
TLC4502CDRIC CMOS 2 CIRCUIT 8SOIC |
3,799 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 2.5V/µs | 4.7 MHz | - | 1 pA | 10 µV | 2.5mA (x2 Channels) | 50 mA | 4 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TLE2141CPIC OPAMP GP 1 CIRCUIT 8DIP |
1,407 |
|
Datasheet | Excalibur™ | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 45V/µs | 5.9 MHz | - | 700 nA | 200 µV | 3.5mA | 50 mA | 4 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
OPA604AUE4AUDIO OPERATIONAL AMP GP |
1,985 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 25V/µs | 20 MHz | - | 50 pA | 1 mV | 5.3mA | 35 mA | 9 V | 48 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
SN412008DRE4SOUNDPLUS AUDIO OPERATIONAL AMPL |
3,737 |
|
Datasheet | SoundPlus™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Audio | 2 | Single-Ended | 1.3V/µs | 8 MHz | - | 5 pA | 500 µV | 4mA (x2 Channels) | 35 mA | 5 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
