Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6629SDX/NOPBIC VOLTAGE FEEDBACK 1 CIRC 8WSON |
1,914 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 1600V/µs | - | 900 MHz | 15 µA | 150 µV | 15.5mA | 250 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-WSON (3x3) |
|
OPA2251UA/2K5G4IC OPAMP GP 2 CIRCUIT 8SOIC |
3,805 |
|
Datasheet | microPOWER™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.01V/µs | 35 kHz | - | 20 nA | 100 µV | 27µA (x2 Channels) | 50 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
THS3120IDGNRIC OPAMP CFA 1 CIRCUIT 8HVSSOP |
4,282 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Obsolete | Current Feedback | 1 | - | 1700V/µs | - | 130 MHz | 3 µA | 2 mV | 7mA | 490 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
|
THS4062CDGNRIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
4,996 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Obsolete | Voltage Feedback | 2 | - | 400V/µs | - | 180 MHz | 3 µA | 2.5 mV | 7.8mA (x2 Channels) | 115 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
|
THS4062CDGNRG4IC OPAMP VFB 2 CIRCUIT 8HVSSOP |
3,133 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Obsolete | Voltage Feedback | 2 | - | 400V/µs | - | 180 MHz | 3 µA | 2.5 mV | 7.8mA (x2 Channels) | 115 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
|
INA133UG4IC OPAMP DIFF 1 CIRCUIT 8SOIC |
3,678 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Differential | 1 | - | 5V/µs | - | 1.5 MHz | - | 150 µV | 950µA | 32 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
ONET8501TYIC TRANSIMPEDANCE 1 CIRC DIESALE |
3,200 |
|
Datasheet | - | Die | Tray | Active | Transimpedance | 1 | - | - | - | 10 GHz | - | - | 28mA | - | 2.97 V | 3.63 V | -40°C ~ 100°C | - | - | Surface Mount | Diesale |
|
TLE2061AIPG4IC OPAMP JFET 1 CIRCUIT 8DIP |
2,310 |
|
Datasheet | Excalibur™ | 8-DIP (0.300", 7.62mm) | Tube | Discontinued at Digi-Key | J-FET | 1 | - | 3.4V/µs | 2 MHz | - | 4 pA | 500 µV | 290µA | 80 mA | 7 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA695IDGKRIC OPAMP CFA 1 CIRCUIT 8VSSOP |
3,607 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 1 | - | 4300V/µs | - | 1.7 GHz | 20 µA | 300 µV | 12.9mA | 120 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
TLV2434AIDIC CMOS 4 CIRCUIT 14SOIC |
1,765 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | 0.25V/µs | 550 kHz | - | 1 pA | 300 µV | 100µA (x4 Channels) | 50 mA | 2.7 V | 10 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
