Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LPC660AIMX/NOPBIC CMOS 4 CIRCUIT 14SOIC |
1,398 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | CMOS | 4 | Push-Pull, Rail-to-Rail | 0.11V/µs | 350 kHz | - | 0.002 pA | 1 mV | 160µA (x4 Channels) | 40 mA | 4.75 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
LMC6081AINIC OPAMP GP 1 CIRCUIT 8DIP |
1,264 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.5V/µs | 1.3 MHz | - | 0.01 pA | 150 µV | 550µA | 34 mA | 4.5 V | 15.5 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
TLC2201ACDRIC OPAMP GP 1 CIRCUIT 8SOIC |
1,277 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 2.7V/µs | 1.9 MHz | - | 1 pA | 80 µV | 1.1mA | 50 mA | 4.6 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
TLC251CPE4SINGLE, 16-V, 1.7-MHZ, IN TO V- |
1,453 |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 1 | Differential | 4V/µs | 2.2 MHz | - | 0.6 pA | 1.1 mV | 950µA | - | 1.4 V | 16 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
|
TLV2463CDIC OPAMP GP 2 CIRCUIT 14SOIC |
4,092 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA (x2 Channels) | 80 mA | 2.7 V | 6 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SOIC |
|
LM6132AINIC OPAMP GP 2 CIRCUIT 8MDIP |
3,105 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 14V/µs | 11 MHz | - | 125 nA | 1.7 mV | 390µA (x2 Channels) | 3.5 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 8-MDIP |
|
OPA2364IDGKTG4IC CMOS 2 CIRCUIT 8VSSOP |
2,248 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | CMOS | 2 | Rail-to-Rail | 5V/µs | 7 MHz | - | 1 pA | 900 µV | 1.1mA (x2 Channels) | 85 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
OPA2727AIDRBRIC CMOS 2 CIRCUIT 8SON |
4,878 |
|
Datasheet | e-trim™ | 8-VDFN Exposed Pad | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 30V/µs | 20 MHz | - | 85 pA | 15 µV | 4.3mA (x2 Channels) | 40 mA | 3.5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SON (3x3) |
|
|
LMH6551MMX/NOPBIC OPAMP VFB 1 CIRCUIT 8VSSOP |
3,465 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | Differential | 2400V/µs | - | 370 MHz | 4 µA | 500 µV | 12.5mA | 65 mA | 3 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
LM6134AINIC OPAMP GP 4 CIRCUIT 14DIP |
4,927 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 14V/µs | 11 MHz | - | 125 nA | 1.7 mV | 390µA (x4 Channels) | 3.5 mA | 1.8 V | 24 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
