Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6624 MDCIC OPAMP VFB 1 CIRCUIT DIESALE |
2,052 |
|
Datasheet | - | Die | Tube | Active | Voltage Feedback | 1 | - | 400V/µs | 1.5 GHz | 95 MHz | 13 µA | 100 µV | 12mA | 100 mA | 5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | Diesale |
|
OPA241PAG4IC OPAMP GP 1 CIRCUIT 8DIP |
4,140 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Discontinued at Digi-Key | General Purpose | 1 | Rail-to-Rail | 0.01V/µs | 35 kHz | - | 4 nA | 100 µV | 27µA | 21 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
TLV2773IDGSG4IC CMOS 2 CIRCUIT 10VSSOP |
4,122 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 700 µV | 1mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-VSSOP |
|
|
ONET8551TYS4IC TRANSIMPEDANCE 1 CIRC WAFER |
3,193 |
|
Datasheet | - | Die | Tube | Active | Transimpedance | 1 | - | - | - | 9 GHz | - | - | 28mA | - | 2.8 V | 3.63 V | -40°C ~ 100°C | - | - | Surface Mount | Wafer |
|
|
ONET8551TYS9IC TRANSIMPEDANCE 1 CIRC WAFER |
2,597 |
|
Datasheet | - | Die | Tube | Active | Transimpedance | 1 | - | - | - | 9 GHz | - | - | 28mA | - | 2.8 V | 3.63 V | -40°C ~ 100°C | - | - | Surface Mount | Wafer |
|
LM7301IM/NOPBIC OPAMP GP 1 CIRCUIT 8SOIC |
2,409 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.25V/µs | 4 MHz | - | 103 nA | 40 µV | 720µA | - | 1.8 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA4342EA/2K5IC CMOS 4 CIRCUIT 14TSSOP |
3,254 |
|
Datasheet | MicroAmplifier™ | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | CMOS | 4 | Rail-to-Rail | 1V/µs | 1 MHz | - | 0.2 pA | 1 mV | 150µA (x4 Channels) | 15 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
LM6134BIMXIC OPAMP GP 4 CIRCUIT 14SOIC |
4,041 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 14V/µs | 11 MHz | - | 125 nA | 1.7 mV | 390µA (x4 Channels) | 3.5 mA | 1.8 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
ONET4201PARGTTG4IC LIMITING 1 CIRCUIT 16VQFN |
1,446 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Discontinued at Digi-Key | Limiting | 1 | Differential | - | - | 25 kHz | - | - | 35mA | - | 3 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
|
TLV2252QDRQ1IC OPAMP GP 2 CIRCUIT 8SOIC |
2,105 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.12V/µs | 200 kHz | - | 1 pA | 200 µV | 70µA (x2 Channels) | 50 mA | 2.7 V | 8 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
