Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LPV324MXIC OPAMP GP 4 CIRCUIT 14SOIC |
1,847 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.1V/µs | 152 kHz | - | 2 nA | 1.5 mV | 28µA (x4 Channels) | 16 mA | 2.7 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
LMV934Q1MTX/NOPBIC OPAMP GP 4 CIRCUIT 14TSSOP |
3,043 |
|
Datasheet | LMV® | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.42V/µs | 1.5 MHz | - | 14 nA | 1 mV | 116µA (x4 Channels) | 100 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-TSSOP |
|
OPA130UA/2K5IC OPAMP GP 1 CIRCUIT 8SOIC |
2,223 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | - | 2V/µs | 1 MHz | - | 5 pA | 200 µV | 530µA | 18 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA130UA/2K5G4IC OPAMP GP 1 CIRCUIT 8SOIC |
1,281 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | - | 2V/µs | 1 MHz | - | 5 pA | 200 µV | 530µA | 18 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2277AIDRMRIC OPAMP GP 2 CIRCUIT 8VSON |
2,739 |
|
Datasheet | - | 8-VDFN Exposed Pad | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 0.8V/µs | 1 MHz | - | 4 nA | 35 µV | - | 35 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSON (4x4) |
|
OPA180QDGKRQ1IC OPAMP ZERO-DRIFT 1CIRC 8VSSOP |
3,045 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.8V/µs | 2 MHz | - | 250 pA | 15 µV | 450µA | 18 mA | 4.5 V | 36 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-VSSOP |
|
|
TLE2072CDRG4IC OPAMP JFET 2 CIRCUIT 8SOIC |
3,670 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | J-FET | 2 | - | 45V/µs | 10 MHz | - | 1 pA | 300 µV | 3.1mA (x2 Channels) | 48 mA | 4.5 V | 38 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LMH6672MAIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
4,216 |
|
Datasheet | LMH® | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 2 | - | 135V/µs | - | 90 MHz | 8 µA | 100 µV | 7.2mA (x2 Channels) | 525 mA | 5 V | 12 V | -40°C ~ 150°C | - | - | Surface Mount | 8-SOIC |
|
TLC072IDGNRIC OPAMP GP 2 CIRCUIT 8HVSSOP |
4,326 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 2 | - | 19V/µs | 10 MHz | - | 1.5 pA | 390 µV | 2.1mA (x2 Channels) | 57 mA | 4.5 V | 16 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-HVSSOP |
|
|
TLC082CDGNRIC OPAMP GP 2 CIRCUIT 8HVSSOP |
2,967 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 2 | - | 19V/µs | 10 MHz | - | 3 pA | 390 µV | 1.9mA (x2 Channels) | 57 mA | 4.5 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-HVSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
