Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLE2072AQDRQ1IC OPAMP JFET 2 CIRCUIT 8SOIC |
1,702 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 2 | - | 45V/µs | 10 MHz | - | 1 pA | 300 µV | 3.1mA (x2 Channels) | 48 mA | 4.5 V | 38 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TLV2764IPWRG4IC OPAMP GP 4 CIRCUIT 14TSSOP |
3,080 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.23V/µs | 500 kHz | - | 3 pA | 550 µV | 20µA (x4 Channels) | 10.2 mA | 1.8 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
LM7171AIN/NOPBIC VOLTAGE FEEDBACK 1 CIRC 8DIP |
1,295 |
|
Datasheet | VIP™ III | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | - | 4100V/µs | 200 MHz | 220 MHz | 2.7 µA | 200 µV | 6.5mA | 118 mA | 5.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
TLC251CDRIC OPAMP GP 1 CIRCUIT 8SOIC |
4,235 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 5.3V/µs | 2.2 MHz | - | 0.7 pA | 1.1 mV | 950µA | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LMV722LD/NOPBIC OPAMP GP 2 CIRCUIT 8WSON |
3,756 |
|
Datasheet | LMV® | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 5.25V/µs | 10 MHz | - | 260 nA | 80 µV | 1.81mA (x2 Channels) | 52.6 mA | 2.2 V | 5.5 V | -40°C ~ 105°C (TJ) | - | - | Surface Mount | 8-WSON (3x2.5) |
|
SM72501MFX/NOPBIC OPAMP GP 1 CIRCUIT SOT23-5 |
4,251 |
|
Datasheet | SolarMagic™ | SC-74A, SOT-753 | Tape & Reel (TR) | Not For New Designs | General Purpose | 1 | Rail-to-Rail | 1.1V/µs | 2.5 MHz | - | 0.2 pA | 37 µV | 790µA | 86 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
OPA251UA/2K5G4IC OPAMP GP 1 CIRCUIT 8SOIC |
4,186 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | Rail-to-Rail | 0.01V/µs | 35 kHz | - | 4 nA | 50 µV | 27µA | 21 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
TLV2772MDG4IC CMOS 2 CIRCUIT 8SOIC |
2,041 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | CMOS | 2 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 360 µV | 1mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
LF347MXIC OPAMP JFET 4 CIRCUIT 14SOIC |
4,646 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 4 | - | 13V/µs | 4 MHz | - | 50 pA | 5 mV | 7.2mA (x4 Channels) | 40 mA | 10 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
LMP2016MMX/NOPBIC OPAMP GP 2 CIRCUIT 8VSSOP |
4,110 |
|
Datasheet | LMP® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 4V/µs | 3 MHz | - | 3 pA | 0.12 µV | 930µA (x2 Channels) | 17 mA | 2.7 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
