Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMV358MXIC OPAMP GP 2 CIRCUIT 8SOIC |
2,497 |
|
Datasheet | LMV® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 1V/µs | 1 MHz | - | 15 nA | 1.7 mV | 210µA (x2 Channels) | 160 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OPA2374AIDCNTG4IC CMOS 2 CIRCUIT SOT23-8 |
1,517 |
|
Datasheet | - | SOT-23-8 | Tape & Reel (TR) | Discontinued at Digi-Key | CMOS | 2 | Rail-to-Rail | 5V/µs | 6.5 MHz | - | 0.5 pA | 1 mV | 585µA (x2 Channels) | 5 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-8 |
|
|
TLV2262AQDG4IC CMOS 2 CIRCUIT 8SOIC |
1,086 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | CMOS | 2 | Rail-to-Rail | 0.55V/µs | 710 kHz | - | 1 pA | 300 µV | 400µA (x2 Channels) | 50 mA | 2.7 V | 8 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
OPA861IDBVRIC OPAMP TRANSCOND 1CIRC SOT23-6 |
3,131 |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | Transconductance | 1 | - | 900V/µs | 80 MHz | - | 1 µA | 3 mV | 5.4mA | 15 mA | 4 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
|
OPA861IDBVRG4IC OPAMP TRANSCOND 1CIRC SOT23-6 |
3,022 |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | Transconductance | 1 | - | 900V/µs | 80 MHz | - | 1 µA | 3 mV | 5.4mA | - | 4 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
|
TLE2021IDG4IC OPAMP GP 1 CIRCUIT 8SOIC |
4,718 |
|
Datasheet | Excalibur™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 0.65V/µs | 2 MHz | - | 25 nA | 120 µV | 240µA | 20 mA | 4 V | 40 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LMC6442IMXIC OPAMP GP 2 CIRCUIT 8SOIC |
4,472 |
|
Datasheet | LMC® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.0041V/µs | 10.5 kHz | - | 0.005 pA | 1.5 mV | 1.9µA (x2 Channels) | 2.1 mA | 1.8 V | 11 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
|
TLV2252AIDRG4IC OPAMP GP 2 CIRCUIT 8SOIC |
1,504 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 2 | Rail-to-Rail | 0.12V/µs | 200 kHz | - | 1 pA | 200 µV | 70µA (x2 Channels) | 50 mA | 2.7 V | 8 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TL054IDRG4IC OPAMP JFET 4 CIRCUIT 14SOIC |
4,169 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | J-FET | 4 | - | 17.8V/µs | 2.7 MHz | - | 30 pA | 560 µV | 8.4mA (x4 Channels) | 80 mA | 10 V | 30 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
INA241B1QDRQ1AEC-Q100, -4V TO 110V BIDIRECTIO |
3,335 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 8V/µs | - | 1.1 MHz | 35 µA | 25 µV | 2.5mA | - | 2.7 V | 20 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
