Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6682MMXIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
1,319 |
|
Datasheet | LMH® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 2 | - | 940V/µs | 120 MHz | 190 MHz | 5 µA | 1 mV | 6.5mA (x2 Channels) | 85 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
OPA2349UAG4IC CMOS 2 CIRCUIT 8SOIC |
3,794 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | CMOS | 2 | Rail-to-Rail | 0.02V/µs | 70 kHz | - | 0.5 pA | 2 mV | 1µA (x2 Channels) | 8 mA | 1.8 V | 5.5 V | -40°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TLV2470IDBVRG4IC OPAMP GP 1 CIRCUIT SOT23-6 |
2,015 |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA | 35 mA | 2.7 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-6 |
|
|
TLE2061IDRG4IC OPAMP JFET 1 CIRCUIT 8SOIC |
1,410 |
|
Datasheet | Excalibur™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | J-FET | 1 | - | 3.4V/µs | 2 MHz | - | 4 pA | 600 µV | 290µA | 80 mA | 7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
TL052AIDRG4IC OPAMP JFET 2 CIRCUIT 8SOIC |
4,980 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | J-FET | 2 | - | 20.7V/µs | 3 MHz | - | 30 pA | 650 µV | 4.8mA (x2 Channels) | 80 mA | 10 V | 30 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
LMH6654MFX/NOPBIC OPAMP VFB 1 CIRCUIT SOT23-5 |
3,669 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 200V/µs | 260 MHz | - | 5 µA | 1 mV | 4.5mA | 120 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
TLC274BIDRG4IC OPAMP GP 4 CIRCUIT 14SOIC |
4,018 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | - | 3.6V/µs | 2.2 MHz | - | 0.6 pA | 340 µV | 2.7mA (x4 Channels) | 30 mA | 4 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
TLC251CPSRG4IC OPAMP GP 1 CIRCUIT 8SO |
2,328 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 5.3V/µs | 2.2 MHz | - | 0.7 pA | 1.1 mV | 950µA | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
OPA2705EA/250G4IC CMOS 2 CIRCUIT 8VSSOP |
3,009 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | CMOS | 2 | Rail-to-Rail | 0.6V/µs | 1 MHz | - | 1 pA | 500 µV | 160µA (x2 Channels) | 10 mA | 4 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
|
OPA2379AIDG4IC OPAMP GP 2 CIRCUIT 8SOIC |
1,070 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | General Purpose | 2 | Rail-to-Rail | 0.03V/µs | 90 kHz | - | 5 pA | 400 µV | 2.9µA (x2 Channels) | 5 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
