Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC071CDG4IC OPAMP GP 1 CIRCUIT 8SOIC |
4,801 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 19V/µs | 10 MHz | - | 1.5 pA | 390 µV | 2.1mA | 57 mA | 4.5 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TL034IDRG4IC OPAMP JFET 4 CIRCUIT 14SOIC |
3,818 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 4 | - | 5.1V/µs | 1.1 MHz | - | 2 pA | 790 µV | 870µA (x4 Channels) | 40 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
TL084ACDIC OPAMP JFET 4 CIRCUIT 14SOIC |
3,685 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 4 | - | 13V/µs | 3 MHz | - | 30 pA | 3 mV | 1.4mA (x4 Channels) | 40 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
|
TLV27L2CDRG4IC OPAMP GP 2 CIRCUIT 8SOIC |
1,974 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 2 | Rail-to-Rail | 0.06V/µs | 160 kHz | - | 1 pA | 500 µV | 7µA (x2 Channels) | 400 µA | 2.7 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LF398 MDCIC SAMPL/HOLD 1 CIRCUIT DIESALE |
1,815 |
|
Datasheet | - | Die | Tube | Active | Sample and Hold | 1 | - | - | - | - | 10 nA | 1 mV | 4.5mA | - | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | Diesale |
|
|
LMC6061IMIC OPAMP GP 1 CIRCUIT 8SOIC |
2,152 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.035V/µs | 100 kHz | - | 0.01 pA | 100 µV | 24µA | 26 mA | 4.5 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
INA212AQDCKRQ1IC CURR SENSE 1 CIRCUIT SC70-6 |
2,130 |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 0.4V/µs | 4 kHz | - | 28 µA | 0.55 µV | 65µA | - | 2.7 V | 26 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | SC-70-6 |
|
INA211BQDCKRQ1IC CURR SENSE 1 CIRCUIT SC70-6 |
4,697 |
|
Datasheet | Zero-Drift | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 0.4V/µs | 14 kHz | - | 28 µA | 0.55 µV | 65µA | - | 2.7 V | 26 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | SC-70-6 |
|
|
INA212BQDCKRQ1IC CURR SENSE 1 CIRCUIT SC70-6 |
4,099 |
|
Datasheet | Zero-Drift | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 0.4V/µs | 14 kHz | - | 28 µA | 0.55 µV | 65µA | - | 2.7 V | 26 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | SC-70-6 |
|
|
INA215BQDCKRQ1IC CURR SENSE 1 CIRCUIT SC70-6 |
1,401 |
|
Datasheet | Zero-Drift | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 0.4V/µs | 40 kHz | - | 28 µA | 1 µV | 65µA | - | 2.7 V | 26 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | SC-70-6 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
