Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA2181A2QDGSRQ1IC CURR SENSE 2 CIRCUIT 10VSSOP |
1,128 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 2 | Rail-to-Rail | 2V/µs | 210 kHz | 210 kHz | 75 µA | 100 µV | 356µA | - | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 10-VSSOP |
|
LMV824MTIC OPAMP GP 4 CIRCUIT 14TSSOP |
3,841 |
|
Datasheet | LMV® | 14-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 2V/µs | 5.6 MHz | - | 40 nA | 1 mV | 1mA (x4 Channels) | 45 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
OPA727AIDGKRG4IC OPAMP GP 1 CIRCUIT 8VSSOP |
4,820 |
|
Datasheet | e-trim™ | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | Rail-to-Rail | 30V/µs | 20 MHz | - | 85 pA | 15 µV | 4.3mA | 40 mA | 4 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
TLC27L2ACDG4IC CMOS 2 CIRCUIT 8SOIC |
1,646 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | CMOS | 2 | - | 0.03V/µs | 110 kHz | - | 0.6 pA | 900 µV | 20µA (x2 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LM837N/NOPBIC OPAMP GP 4 CIRCUIT 14DIP |
4,771 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 10V/µs | 25 MHz | - | 500 nA | 300 µV | 10mA (x4 Channels) | 40 mA | 30 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
TL3474AIDG4IC OPAMP GP 4 CIRCUIT 14SOIC |
1,917 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 13V/µs | 4 MHz | - | 100 nA | 1 mV | 3.5mA (x4 Channels) | 34 mA | 4 V | 36 V | -40°C ~ 105°C | - | - | Surface Mount | 14-SOIC |
|
|
OPA2338UA/2K5G4IC CMOS 2 CIRCUIT 8SOIC |
2,274 |
|
Datasheet | MicroAmplifier™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | CMOS | 2 | Rail-to-Rail | 4.6V/µs | 12.5 MHz | - | 0.2 pA | 500 µV | 525µA (x2 Channels) | 9 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LP2902PWRIC OPAMP GP 4 CIRCUIT 14TSSOP |
3,280 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 0.05V/µs | 100 kHz | - | 2 nA | 2 mV | 85µA (x4 Channels) | 10 mA | 3 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
|
TL052CDIC OPAMP JFET 2 CIRCUIT 8SOIC |
1,712 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 2 | - | 20.7V/µs | 3 MHz | - | 30 pA | 650 µV | 4.8mA (x2 Channels) | 80 mA | 10 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA237NA/3KG4IC OPAMP GP 1 CIRCUIT SOT23-5 |
4,685 |
|
Datasheet | MicroAmplifier™ | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 0.5V/µs | 1.5 MHz | - | 8.5 nA | 350 µV | 200µA | 8 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
