Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LPV321DCKRE4IC OPAMP GP 1 CIRCUIT SC70-5 |
2,476 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.1V/µs | 237 kHz | - | 2 nA | 1.5 mV | 9µA | - | 2.7 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
LPV321IDBVRE4IC OPAMP GP 1 CIRCUIT SOT23-5 |
4,869 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.1V/µs | 237 kHz | - | 2 nA | 1.5 mV | 9µA | - | 2.7 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
LPV321IDCKRE4IC OPAMP GP 1 CIRCUIT SC70-5 |
3,917 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.1V/µs | 237 kHz | - | 2 nA | 1.5 mV | 9µA | - | 2.7 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-5 |
|
|
LPV321DBVRG4IC OPAMP GP 1 CIRCUIT SOT23-5 |
3,979 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.1V/µs | 237 kHz | - | 2 nA | 1.5 mV | 9µA | - | 2.7 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
LPV321IDBVRG4IC OPAMP GP 1 CIRCUIT SOT23-5 |
3,146 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.1V/µs | 237 kHz | - | 2 nA | 1.5 mV | 9µA | - | 2.7 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
LM324APWRG4IC OPAMP GP 4 CIRCUIT 14TSSOP |
3,533 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 15 nA | 2 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
TL062ACDRE4IC OPAMP JFET 2 CIRCUIT 8SOIC |
2,065 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | J-FET | 2 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA (x2 Channels) | - | 10 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
TL062ACDRG4IC OPAMP JFET 2 CIRCUIT 8SOIC |
3,139 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | J-FET | 2 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA (x2 Channels) | - | 10 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
LM2904 MWCIC OPAMP GP 2 CIRCUIT WAFER |
4,502 |
|
Datasheet | - | Die | Bulk | Active | General Purpose | 2 | - | 0.3V/µs | 700 kHz | - | 20 nA | 3 mV | 500µA (x2 Channels) | 40 mA | 3 V | 26 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | Wafer |
|
LM358BPXIC OPAMP GP 2 CIRCUIT 8USMD |
4,091 |
|
Datasheet | - | 8-VFBGA | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 2 | - | 0.5V/µs | 1.2 MHz | - | 10 nA | 1 mV | 300µA (x2 Channels) | 40 mA | 3 V | 30 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-uSMD |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
