Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA333AIDRGTIC INST AMP 1 CIRCUIT 8SON |
1,658 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Instrumentation | 1 | Rail-to-Rail | 0.16V/µs | - | 150 kHz | 70 pA | 10 µV | 50µA | 40 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SON (3x3) |
|
INA333AIDGKTIC INST AMP 1 CIRCUIT 8VSSOP |
1,616 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | Rail-to-Rail | 0.16V/µs | - | 150 kHz | 70 pA | 10 µV | 50µA | 40 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
AMC1300BQDWVRQ1AUTOMOTIVE 250-MV INPUT, REINFOR |
1,593 |
|
Datasheet | - | 8-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | Isolation | 1 | - | - | 1 MHz | - | 30 µA | 10 µV | 5.9mA | 14 mA | 3 V | 5.5 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
OPA2277UAIC OPAMP GP 2 CIRCUIT 8SOIC |
1,031 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | - | 0.8V/µs | 1 MHz | - | 4 nA | 20 µV | 790µA (x2 Channels) | 35 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LMH6624MF/NOPBIC OPAMP VFB 1 CIRCUIT SOT23-5 |
2,249 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 400V/µs | 1.5 GHz | 95 MHz | 13 µA | 100 µV | 12mA | 100 mA | 5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
LM675T/NOPBIC POWER 1 CIRCUIT TO220-5 |
126 |
|
Datasheet | - | TO-220-5 Formed Leads | Tube | Active | Power | 1 | - | 8V/µs | 5.5 MHz | - | 200 nA | 1 mV | 18mA | 3 A | 10 V | 60 V | 0°C ~ 70°C | - | - | Through Hole | TO-220-5 |
|
|
LM6152ACMX/NOPBIC OPAMP GP 2 CIRCUIT 8SOIC |
7,557 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 30V/µs | 80 MHz | - | 500 nA | 300 µV | 1.6mA (x2 Channels) | 16.9 mA | 2.7 V | 24 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LMH6629SD/NOPBIC VOLTAGE FEEDBACK 1 CIRC 8WSON |
9,936 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 1600V/µs | - | 900 MHz | 15 µA | 150 µV | 15.5mA | 250 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-WSON (3x3) |
|
THS4522IPWIC OPAMP DIFF 2 CIRCUIT 16TSSOP |
2,594 |
|
Datasheet | - | 16-TSSOP (0.173", 4.40mm Width) | Tube | Active | Differential | 2 | Differential, Rail-to-Rail | 600V/µs | 95 MHz | 145 MHz | 700 nA | 240 µV | 1.14mA (x2 Channels) | 55 mA | 2.5 V | 5.5 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-TSSOP |
|
|
LMP7721MA/NOPBIC OPAMP GP 1 CIRCUIT 8SOIC |
1,288 |
|
Datasheet | LMP®, PowerWise® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 12.8V/µs | 17 MHz | - | 0.003 pA | 26 µV | 1.3mA | 60 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
