Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4211DRBTIC VOLTAGE FEEDBACK 1 CIRC 8SON |
3,460 |
|
Datasheet | - | 8-VDFN Exposed Pad | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 970V/µs | 350 MHz | 325 MHz | 7 µA | 3 mV | 19mA | 220 mA | 5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SON (3x3) |
|
THS4150IDRIC OPAMP DIFF 1 CIRCUIT 8SOIC |
1,881 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Differential | 1 | Differential | 650V/µs | 340 MHz | 150 MHz | 4.3 µA | 1.1 mV | 17.5mA | 85 mA | 4 V | 33 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA124U/2K5OPA124 LOW NOISE PRECISION DIFET |
2,160 |
|
Datasheet | Difet® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | - | 1.6V/µs | 1.5 MHz | - | 1 pA | 200 µV | 2.5mA | 10 mA | 10 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LM7372MRIC OPAMP VFB 2 CIRCUIT 8SOPWRPAD |
2,236 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 2 | - | 3000V/µs | 120 MHz | 220 MHz | 2.7 µA | 2 mV | 13mA (x2 Channels) | 260 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
|
|
THS3121CDIC OPAMP CFA 1 CIRCUIT 8SOIC |
4,029 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 1 | - | 1700V/µs | - | 130 MHz | 3 µA | 2 mV | 7mA | 490 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
LM6171AIM/NOPBIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
726 |
|
Datasheet | VIP™ III | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 3600V/µs | 100 MHz | 160 MHz | 1 µA | 1.5 mV | 2.5mA | 116 mA | 5.5 V | 34 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA3684IDIC OPAMP CFA 3 CIRCUIT 14SOIC |
1,956 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 3 | - | 780V/µs | 1.9 GHz | 250 MHz | 5 µA | 1.5 mV | 1.7mA | 160 mA | 2.8 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
SN5522JIC CURR SENSE 1 CIRCUIT 16CDIP |
155 |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Bulk | Active | Current Sense | 1 | - | - | - | - | 30 µA | - | - | - | 9.5 V | 10.5 V | -55°C ~ 125°C | - | - | Through Hole | 16-CDIP |
|
TLC1079CNIC CMOS 4 CIRCUIT 14DIP |
4,325 |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | CMOS | 4 | - | 0.032V/µs | 110 kHz | - | 1 pA | 180 µV | 29µA (x4 Channels) | 30 mA | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
THS4501CDIC OPAMP DIFF 1 CIRCUIT 8SOIC |
3,278 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Differential | 1 | Differential | 2800V/µs | 300 MHz | 370 MHz | 4 µA | 4 mV | 23mA | - | 4.5 V | 15 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
