Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV2782IDGKIC OPAMP GP 2 CIRCUIT 8VSSOP |
4,308 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 5V/µs | 8 MHz | - | 2.5 pA | 250 µV | 650µA (x2 Channels) | 23 mA | 1.8 V | 3.6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
LMC6044-MDCIC CMOS 4 CIRCUIT DIE |
3,463 |
|
Datasheet | LMC® | Die | Bulk | Obsolete | CMOS | 4 | Push-Pull, Rail-to-Rail | 0.02V/µs | 100 kHz | - | 0.002 pA | 1 mV | 52µA (x4 Channels) | 40 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | Die |
|
TLC2274AMDG4IC OPAMP GP 4 CIRCUIT 14SOIC |
1,369 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Discontinued at Digi-Key | General Purpose | 4 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 4.8mA (x4 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
ONET4201PARGTRIC LIMITING 1 CIRCUIT 16VQFN |
1,299 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Limiting | 1 | Differential | - | - | 25 kHz | - | - | 35mA | - | 3 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
TLV2450CDBVTIC OPAMP GP 1 CIRCUIT SOT23-6 |
497 |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.11V/µs | 220 kHz | - | 500 pA | 300 µV | 23µA | 10 mA | 2.7 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | SOT-23-6 |
|
TLV2624IPWIC CMOS 4 CIRCUIT 14TSSOP |
255 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | CMOS | 4 | Rail-to-Rail | 7V/µs | 11 MHz | - | 2 pA | 250 µV | 800µA (x4 Channels) | 28 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
LPC662IMX/NOPBIC CMOS 2 CIRCUIT 8SOIC |
2,170 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 0.11V/µs | 350 kHz | - | 0.002 pA | 1 mV | 86µA (x2 Channels) | 40 mA | 4.75 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
|
OPA2244UAIC OPAMP GP 2 CIRCUIT 8SOIC |
2,680 |
|
Datasheet | MicroAmplifier™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | 0.1V/µs | 430 kHz | - | 10 nA | 700 µV | 40µA (x2 Channels) | 25 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2244EA/250IC OPAMP GP 2 CIRCUIT 8VSSOP |
1,318 |
|
Datasheet | MicroAmplifier™ | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 0.1V/µs | 430 kHz | - | 10 nA | 700 µV | 40µA (x2 Channels) | 25 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
|
OPA2614IDRIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
3,106 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Differential | 145V/µs | 290 MHz | 180 MHz | 6 µA | 200 µV | 12mA (x2 Channels) | 350 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
