Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA340NA/250G4IC OPAMP GP 1 CIRCUIT SOT23-5 |
131 |
|
Datasheet | MicroAmplifier™ | SC-74A, SOT-753 | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | Rail-to-Rail | 6V/µs | 5.5 MHz | - | 0.2 pA | 150 µV | 750µA | 50 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
OPA4345EA/2K5IC CMOS 4 CIRCUIT 14TSSOP |
2,048 |
|
Datasheet | MicroAmplifier™ | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | CMOS | 4 | Rail-to-Rail | 2V/µs | 3 MHz | - | 0.2 pA | 200 µV | 150µA (x4 Channels) | 15 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
LMC660CN/NOPBIC CMOS 4 CIRCUIT 14DIP |
665 |
|
Datasheet | LMC® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 4 | Push-Pull, Rail-to-Rail | 1.1V/µs | 1.4 MHz | - | 0.002 pA | 1 mV | 1.5mA (x4 Channels) | 40 mA | 4.75 V | 15.5 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
OPA2677U/2K5IC OPAMP CFA 2 CIRCUIT 8SOIC |
3,449 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 2 | - | 2000V/µs | 2 GHz | 250 MHz | 10 µA | 800 µV | 18mA (x2 Channels) | 500 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
INA156EA/2K5IC INST AMP 1 CIRCUIT 8VSSOP |
4,699 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | Rail-to-Rail | 6.5V/µs | - | 550 kHz | 1 pA | 2.5 mV | 1.8mA | 50 mA | 2.7 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
|
THS4001CDRIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
4,151 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 400V/µs | 270 MHz | 270 MHz | 2.6 µA | 2 mV | 7.8mA | 100 mA | 5 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
LPC662AIMIC CMOS 2 CIRCUIT 8SOIC |
1,657 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 2 | Push-Pull, Rail-to-Rail | 0.11V/µs | 350 kHz | - | 0.002 pA | 1 mV | 86µA (x2 Channels) | 40 mA | 4.75 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
LMC6484IM/NOPBIC CMOS 4 CIRCUIT 14SOIC |
3,520 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | 1.3V/µs | 1.5 MHz | - | 0.02 pA | 110 µV | 2.6mA (x4 Channels) | 30 mA | 3 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 14-SOIC |
|
|
TLE2022IDIC OPAMP GP 2 CIRCUIT 8SOIC |
1,187 |
|
Datasheet | Excalibur™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | 0.65V/µs | 2.8 MHz | - | 35 nA | 150 µV | 550µA (x2 Channels) | 30 mA | 4 V | 40 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TL054CNSRIC OPAMP JFET 4 CIRCUIT 14SO |
2,832 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 4 | - | 17.8V/µs | 2.7 MHz | - | 30 pA | 560 µV | 8.4mA (x4 Channels) | 80 mA | 10 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SO |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
