Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2333AIDRIC OPAMP ZERO-DRIFT 2 CIRC 8SOIC |
2,418 |
|
Datasheet | Zero-Drift | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS, Zero-Drift | 2 | Rail-to-Rail | 0.16V/µs | 350 kHz | - | 70 pA | 2 µV | 17µA (x2 Channels) | 5 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LMH6655MM/NOPBIC OPAMP VFB 2 CIRCUIT 8VSSOP |
946 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | - | 200V/µs | 260 MHz | - | 5 µA | 1 mV | 4.5mA (x2 Channels) | 120 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
|
LMP2022MAX/NOPBIC OPAMP ZERO-DRIFT 2 CIRC 8SOIC |
4,972 |
|
Datasheet | LMP® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 2 | - | 2.6V/µs | 5 MHz | - | 25 pA | 0.4 µV | 1.1mA (x2 Channels) | 50 mA | 2.2 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OPA140AIDBVRIC OPAMP JFET 1 CIRCUIT SOT23-5 |
7,284 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | J-FET | 1 | Rail-to-Rail | 20V/µs | 11 MHz | - | 0.5 pA | 30 µV | 1.8mA | 36 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
OPA140AIDRIC OPAMP JFET 1 CIRCUIT 8SOIC |
2,332 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | Rail-to-Rail | 20V/µs | 11 MHz | - | 0.5 pA | 30 µV | 1.8mA | 36 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OPA2205ADRDUAL, RAIL-TO-RAIL BIPOLAR PRECI |
600 |
|
Datasheet | e-trim™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Push-Pull, Rail-to-Rail | 4V/µs | 3.6 MHz | - | 100 pA | 4 µV | 220µA (x2 Channels) | 25 mA | 4.5 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
OPA2340UA/2K5IC CMOS 2 CIRCUIT 8SOIC |
18,779 |
|
Datasheet | microPOWER™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 6V/µs | 5.5 MHz | - | 0.2 pA | 150 µV | 750µA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2340EA/2K5IC CMOS 2 CIRCUIT 8VSSOP |
6,646 |
|
Datasheet | microPOWER™ | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 6V/µs | 5.5 MHz | - | 0.2 pA | 150 µV | 750µA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
OPA2836IRUNRIC OPAMP VFB 2 CIRCUIT 10WQFN |
4,893 |
|
Datasheet | - | 10-WFQFN | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Differential, Rail-to-Rail | 580V/µs | 118 MHz | 205 MHz | 650 nA | 65 µV | 1mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-WQFN (2x2) |
|
|
LMC6082IMX/NOPBIC CMOS 2 CIRCUIT 8SOIC |
4,043 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 1.5V/µs | 1.3 MHz | - | 0.01 pA | 150 µV | 1.1mA (x2 Channels) | 34 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
