Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2677HIC OPAMP CFA 2 CIRCUIT 8HSOP |
2,381 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | Tube | Obsolete | Current Feedback | 2 | - | 2000V/µs | 2 GHz | 250 MHz | 10 µA | 800 µV | 18mA (x2 Channels) | 500 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HSOP |
|
TLC27M9CNIC CMOS 4 CIRCUIT 14DIP |
2,151 |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | CMOS | 4 | - | 0.62V/µs | 525 kHz | - | 0.7 pA | 210 µV | 570µA (x4 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
TLE2061CDIC OPAMP JFET 1 CIRCUIT 8SOIC |
4,762 |
|
Datasheet | Excalibur™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | J-FET | 1 | - | 3.4V/µs | 2 MHz | - | 4 pA | 600 µV | 290µA | 80 mA | 7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TLC084QPWPRQ1IC OPAMP GP 4 CIRCUIT 20HTSSOP |
2,432 |
|
Datasheet | - | 20-PowerTSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 19V/µs | 10 MHz | - | 3 pA | 390 µV | 1.9mA (x4 Channels) | 57 mA | 4.5 V | 16 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 20-HTSSOP |
|
|
TLV2342IDIC CMOS 2 CIRCUIT 8SOIC |
1,385 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 2 | - | 3.6V/µs | 1.7 MHz | - | 0.6 pA | 1.1 mV | 1.4mA (x2 Channels) | 30 mA | 2 V | 8 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2694IDRIC OPAMP CFA 2 CIRCUIT 8SOIC |
2,629 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | Differential | 1700V/µs | 690 MHz | 1.5 GHz | 5 µA | 700 µV | 11.6mA (x2 Channels) | 70 mA | 7 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLV2342IPWIC CMOS 2 CIRCUIT 8TSSOP |
3,993 |
|
Datasheet | LinCMOS™ | 8-TSSOP (0.173", 4.40mm Width) | Bulk | Obsolete | CMOS | 2 | - | 3.6V/µs | 1.7 MHz | - | 0.6 pA | 1.1 mV | 1.4mA (x2 Channels) | 30 mA | 2 V | 8 V | -40°C ~ 85°C | - | - | Surface Mount | 8-TSSOP |
|
|
TLC2272ACPWIC CMOS 2 CIRCUIT 8TSSOP |
1,268 |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 2.4mA (x2 Channels) | 50 mA | 4.4 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-TSSOP |
|
ONET8511TYIC TRANSIMPEDANCE 1 CIRC DIESALE |
1,786 |
|
Datasheet | - | Die | Tray | Obsolete | Transimpedance | 1 | Differential | - | - | 8 GHz | - | - | 46mA | - | 2.95 V | 3.6 V | -25°C ~ 100°C | - | - | Surface Mount | Diesale |
|
|
TLE2082ACDIC OPAMP JFET 2 CIRCUIT 8SOIC |
2,187 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | J-FET | 2 | - | 40V/µs | 10 MHz | - | 20 pA | 700 µV | 3.1mA (x2 Channels) | 48 mA | 4.5 V | 38 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
