Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLE2061AIPIC OPAMP JFET 1 CIRCUIT 8DIP |
1,644 |
|
Datasheet | Excalibur™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 3.4V/µs | 2 MHz | - | 4 pA | 500 µV | 290µA | 80 mA | 7 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LMC6494BEMIC CMOS 4 CIRCUIT 14SOIC |
2,093 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | 1.3V/µs | 1.5 MHz | - | 0.15 pA | 110 µV | 2.6mA (x4 Channels) | 30 mA | 2.5 V | 15.5 V | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 14-SOIC |
|
OPA642N/3KIC OPAMP VFB 210MHZ SGL SOT23-5 |
2,760 |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Obsolete | Voltage Feedback | 1 | - | 380V/µs | 210 MHz | - | 25 µA | 1.5 mV | 20mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
LF411ACN/NOPBIC OPAMP JFET 1 CIRCUIT 8DIP |
4,522 |
|
Datasheet | BI-FET II™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 1 | - | 15V/µs | 4 MHz | - | 50 pA | 300 µV | 1.8mA | - | 10 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
OPA3681U/2K5IC OPAMP CFA 3 CIRCUIT 16SOIC |
22,500 |
|
Datasheet | SpeedPlus™ | 16-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 3 | - | 2100V/µs | - | 280 MHz | 30 µA | 1.3 mV | 18mA | 190 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
THS4121CDGNRIC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
3,419 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Obsolete | Differential | 1 | Differential | 55V/µs | - | 100 MHz | 1.2 pA | 3 mV | 11mA | 100 mA | 3 V | 3.5 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
TLC2654Q-8DIC OPAMP GP 1 CIRCUIT 8SOIC |
4,759 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 3.7V/µs | 1.9 MHz | - | 50 pA | 5 µV | 1.5mA | 50 mA | 4.6 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TLV2455CDIC OPAMP GP 4 CIRCUIT 16SOIC |
9,541 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.11V/µs | 220 kHz | - | 500 pA | 300 µV | 23µA (x4 Channels) | 10 mA | 2.7 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
OPA2613IDTJIC VOLTAGE FEEDBACK 2 CIRC 8HSOP |
3,429 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | Tube | Obsolete | Voltage Feedback | 2 | - | 70V/µs | 125 MHz | 230 MHz | 6 µA | 200 µV | 12mA (x2 Channels) | 350 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HSOP |
|
|
TLV2771CDBVTIC OPAMP GP 1 CIRCUIT SOT23-5 |
1,005 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 500 µV | 1mA | 50 mA | 2.5 V | 5.5 V | 0°C ~ 70°C | - | - | Surface Mount | SOT-23-5 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
