Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV2455INIC OPAMP GP 4 CIRCUIT 16DIP |
9,225 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.11V/µs | 220 kHz | - | 500 pA | 300 µV | 23µA (x4 Channels) | 10 mA | 2.7 V | 6 V | -40°C ~ 125°C | - | - | Through Hole | 16-PDIP |
|
TLV2475IDRIC CMOS 4 CIRCUIT 16SOIC |
2,233 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | CMOS | 4 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA (x4 Channels) | 35 mA | 2.7 V | 6 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 16-SOIC |
|
OPA2822E/2K5IC OPAMP GP 2 CIRCUIT 8VSSOP |
4,459 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 170V/µs | 240 MHz | 400 MHz | 9 µA | 200 µV | 9.6mA (x2 Channels) | 150 mA | 4 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
TL5580AIPWIC OPAMP GP 2 CIRCUIT 8TSSOP |
2,595 |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | General Purpose | 2 | - | 5V/µs | 12 MHz | - | 100 nA | 300 µV | 6mA | 50 mA | 4 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-TSSOP |
|
THS3110CDGNRIC OPAMP CFA 1 CIRCUIT 8HVSSOP |
2,601 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Obsolete | Current Feedback | 1 | - | 1300V/µs | - | 100 MHz | 1.5 µA | 3 mV | 4.8mA | 260 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
TL034INIC OPAMP JFET 4 CIRCUIT 14DIP |
150 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | J-FET | 4 | - | 5.1V/µs | 1.1 MHz | - | 2 pA | 790 µV | 870µA (x4 Channels) | 40 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
OPA2347YEDTIC OPAMP GP 2 CIRCUIT 8DSBGA |
3,801 |
|
Datasheet | microPOWER™ | 8-XFBGA, DSBGA | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.17V/µs | 350 kHz | - | 0.5 pA | 2 mV | 20µA (x2 Channels) | 17 mA | 2.3 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 8-DSBGA (1.9x0.9) |
|
TLV2772MDIC CMOS 2 CIRCUIT 8SOIC |
1,132 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 2 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 360 µV | 1mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA635N/250IC OPAMP VFB 140MHZ SGL SOT23-6 |
3,000 |
|
Datasheet | SpeedPlus™ | SOT-23-6 | Bulk | Obsolete | Voltage Feedback | 1 | - | 250V/µs | 140 MHz | 150 MHz | 25 µA | 3 mV | 12mA | 100 mA | 2.7 V | 10.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
TLV2472AIPIC CMOS 2 CIRCUIT 8DIP |
1,897 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA (x2 Channels) | 35 mA | 2.7 V | 6 V | -40°C ~ 125°C (TA) | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
