Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV2465CPWRG4IC OPAMP GP 6.4MHZ RRO 16TSSOP |
4,000 |
|
Datasheet | - | 16-TSSOP (0.173", 4.40mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA (x4 Channels) | 80 mA | 2.7 V | 6 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 16-TSSOP |
|
LM358MXIC OPAMP GP 2 CIRCUIT 8SOIC |
2,192 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | - | - | - | 45 nA | 2 mV | 1mA | 30 mA | 3 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TLE2141AIPIC OPAMP GP 1 CIRCUIT 8DIP |
1,787 |
|
Datasheet | Excalibur™ | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 1 | - | 45V/µs | 5.9 MHz | - | 700 nA | 175 µV | 3.5mA | 50 mA | 4 V | 44 V | -40°C ~ 105°C | - | - | Through Hole | 8-PDIP |
|
TL5580IPWIC OPAMP GP 2 CIRCUIT 8TSSOP |
3,962 |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | General Purpose | 2 | - | 5V/µs | 12 MHz | - | 100 nA | 300 µV | 6mA | 50 mA | 4 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-TSSOP |
|
TLV2465CNIC OPAMP GP 4 CIRCUIT 16DIP |
1,449 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA (x4 Channels) | 80 mA | 2.7 V | 6 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 16-PDIP |
|
|
LME49720MA/NOPBIC AUDIO 2 CIRCUIT 8SOIC |
2,359 |
|
Datasheet | LME® | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Audio | 2 | - | 20V/µs | 55 MHz | - | 10 nA | 100 µV | 10mA (x2 Channels) | 26 mA | 5 V | 34 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
TLV4113CDGQIC OPAMP GP 2 CIRCUIT 10HVSSOP |
2,450 |
|
Datasheet | - | 10-PowerTFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 1.57V/µs | 2.7 MHz | - | 0.3 pA | 175 µV | 700µA (x2 Channels) | 320 mA | 2.5 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 10-HVSSOP |
|
TLV2334IDRIC OPAMP GP 4 CIRCUIT 14SOIC |
5,000 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | - | 0.43V/µs | 525 kHz | - | 0.6 pA | 1.1 mV | 210µA (x4 Channels) | 30 mA | 2 V | 8 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
TLV2334IPWIC OPAMP GP 4 CIRCUIT 14TSSOP |
1,630 |
|
Datasheet | LinCMOS™ | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | General Purpose | 4 | - | 0.43V/µs | 525 kHz | - | 0.6 pA | 1.1 mV | 210µA (x4 Channels) | 30 mA | 2 V | 8 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
TLC2652INIC OPAMP ZER-DRIFT 1CIRC 14DIP |
1,163 |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Active | Chopper (Zero-Drift) | 1 | Single-Ended | 2.8V/µs | 1.9 MHz | - | 4 pA | 0.6 µV | 1.5mA | 50 mA | 3.8 V | 16 V | -55°C ~ 125°C | - | - | Through Hole | 14-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
