Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV2462QDIC OPAMP GP 2 CIRCUIT 8SOIC |
4,827 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA (x2 Channels) | 80 mA | 2.7 V | 6 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
THS4215DRBIC VOLTAGE FEEDBACK 1 CIRC 8VSON |
1,089 |
|
Datasheet | - | 8-VDFN Exposed Pad | Bulk | Active | Voltage Feedback | 1 | - | 970V/µs | 350 MHz | 325 MHz | 7 µA | 3 mV | 19mA | 220 mA | 5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSON (3x3) |
|
|
THS4211DRBIC VOLTAGE FEEDBACK 1 CIRC 8VSON |
893 |
|
Datasheet | - | 8-VDFN Exposed Pad | Bulk | Active | Voltage Feedback | 1 | - | 970V/µs | 350 MHz | 325 MHz | 7 µA | 3 mV | 19mA | 220 mA | 5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSON (3x3) |
|
|
TLV2442AIDIC CMOS 2 CIRCUIT 8SOIC |
4,862 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 1.4V/µs | 1.81 MHz | - | 1 pA | 300 µV | 750µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLV2442AIPWIC CMOS 2 CIRCUIT 8TSSOP |
4,831 |
|
Datasheet | LinCMOS™ | 8-TSSOP (0.173", 4.40mm Width) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 1.4V/µs | 1.81 MHz | - | 1 pA | 300 µV | 750µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 8-TSSOP |
|
TLV2450AIPE4IC OPAMP GP 220KHZ RRO 8DIP |
263 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.11V/µs | 220 kHz | - | 500 pA | 300 µV | 23µA | 10 mA | 2.7 V | 6 V | -40°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
|
TLC27L2IDIC CMOS 2 CIRCUIT 8SOIC |
101 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | - | 0.03V/µs | 110 kHz | - | 0.6 pA | 1.1 mV | 20µA (x2 Channels) | 30 mA | 4 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
TLV2470IDIC OPAMP GP 1 CIRCUIT 8SOIC |
3,344 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA | 35 mA | 2.7 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LMV932IDGKRIC OPAMP GP 2 CIRCUIT 8VSSOP |
2,020 |
|
Datasheet | LMV® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.42V/µs | 1.5 MHz | - | 15 nA | 1 mV | 116µA (x2 Channels) | 100 mA | 1.8 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
|
LMV932IDRIC OPAMP GP 2 CIRCUIT 8SOIC |
3,069 |
|
Datasheet | LMV® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.42V/µs | 1.5 MHz | - | 15 nA | 1 mV | 116µA (x2 Channels) | 100 mA | 1.8 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
