Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM224KADIC OPAMP GP 4 CIRCUIT 14SOIC |
1,920 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 15 nA | 2 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 30 V | -25°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
TLV2635INIC OPAMP GP 4 CIRCUIT 16DIP |
559 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 10V/µs | 9 MHz | - | 0.7 pA | 1.1 mV | 3.8mA (x4 Channels) | 28 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Through Hole | 16-PDIP |
|
OPA357AIDDAIC OPAMP VFB 1 CIRCUIT 8SOPWRPAD |
2,243 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 150V/µs | 100 MHz | 250 MHz | 3 pA | 2 mV | 4.9mA | 100 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO PowerPad |
|
OPA2344PAIC CMOS 2 CIRCUIT 8DIP |
1,502 |
|
Datasheet | MicroAmplifier™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 0.8V/µs | 1 MHz | - | 0.2 pA | 200 µV | 150µA (x2 Channels) | 15 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
TLV2422CDRIC OPAMP GP 2 CIRCUIT 8SOIC |
3,779 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.02V/µs | 5.3 MHz | - | 1 pA | 300 µV | 100µA (x2 Channels) | 50 mA | 2.7 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LP2902PWIC OPAMP GP 4 CIRCUIT 14TSSOP |
1,259 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Obsolete | General Purpose | 4 | - | 0.05V/µs | 100 kHz | - | 2 nA | 2 mV | 85µA (x4 Channels) | 10 mA | 3 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
|
LMC6032IMIC CMOS 2 CIRCUIT 8SOIC |
1,390 |
|
Datasheet | LMC® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 2 | - | 1.1V/µs | 1.4 MHz | - | 0.04 pA | 1 mV | 750µA (x2 Channels) | 40 mA | 4.75 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LP2902DIC OPAMP GP 4 CIRCUIT 14SOIC |
966 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | - | 0.05V/µs | 100 kHz | - | 2 nA | 2 mV | 85µA (x4 Channels) | 10 mA | 3 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
TL064IDIC OPAMP JFET 4 CIRCUIT 14SOIC |
1,223 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 4 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA (x4 Channels) | 20 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
TLC081IPIC OPAMP GP 1 CIRCUIT 8DIP |
3,898 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 19V/µs | 10 MHz | - | 2 pA | 390 µV | 1.9mA | 57 mA | 4.5 V | 16 V | -40°C ~ 125°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
