Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC27M2BCDIC CMOS 2 CIRCUIT 8SOIC |
3,777 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 2 | - | 0.62V/µs | 635 kHz | - | 0.7 pA | 224 µV | 285µA (x2 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
TL082CPSRIC OPAMP JFET 2 CIRCUIT 8SO |
6,142 |
|
Datasheet | - | 8-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 13V/µs | 3 MHz | - | 30 pA | 3 mV | 1.4mA (x2 Channels) | 10 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
TLC27M2ACDIC CMOS 2 CIRCUIT 8SOIC |
3,579 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 2 | - | 0.62V/µs | 635 kHz | - | 0.7 pA | 900 µV | 285µA (x2 Channels) | 30 mA | 4 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
TLC27M2MDG4IC CMOS 2 CIRCUIT 8SOIC |
3,773 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 2 | - | 0.62V/µs | 635 kHz | - | 0.7 pA | 1.1 mV | 285µA (x2 Channels) | 30 mA | 4 V | 16 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
TLC272AIPIC CMOS 2 CIRCUIT 8DIP |
4,676 |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | - | 5.3V/µs | 2.2 MHz | - | 0.7 pA | 900 µV | 1.4mA (x2 Channels) | 30 mA | 4 V | 16 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 8-PDIP |
|
|
OPA363AIDIC OPAMP GP 1 CIRCUIT 8SOIC |
3,062 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 5V/µs | 7 MHz | - | 1 pA | 1 mV | 1.1mA | 85 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA363AIDRIC OPAMP GP 1 CIRCUIT 8SOIC |
4,283 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 5V/µs | 7 MHz | - | 1 pA | 1 mV | 1.1mA | 85 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LMV981IRUGRIC OPAMP GP 1 CIRCUIT 8X2QFN |
2,294 |
|
Datasheet | - | 8-XFQFN | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.42V/µs | 1.5 MHz | - | 15 nA | 1 mV | 116µA | 100 mA | 1.8 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-X2QFN (1.5x1.5) |
|
OPA234EAIC OPAMP GP 1 CIRCUIT 8VSSOP |
32,942 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | General Purpose | 1 | - | 0.2V/µs | 350 kHz | - | 12 nA | 70 µV | 275µA | 22 mA | 2.7 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
|
TLV2461QDRG4IC OPAMP GP 1 CIRCUIT 8SOIC |
4,043 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA | 80 mA | 2.7 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
