Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLE2021CPWIC OPAMP GP 1 CIRCUIT 8TSSOP |
7,050 |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Bulk | Active | General Purpose | 1 | - | 0.5V/µs | 2 MHz | - | 25 nA | 150 µV | 240µA | 20 mA | 4 V | 40 V | 0°C ~ 70°C | Automotive | AEC-Q100 | Surface Mount | 8-TSSOP |
|
LM2904PSRIC OPAMP GP 2 CIRCUIT 8SO |
6,185 |
|
Datasheet | - | 8-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 0.3V/µs | 700 kHz | - | 20 nA | 3 mV | 500µA (x2 Channels) | 40 mA | 3 V | 26 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SO |
|
|
TL072IDRE4IC OPAMP JFET 2 CIRCUIT 8SOIC |
1,804 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 2 | - | 13V/µs | 5.25 MHz | - | 65 pA | 3 mV | 1.4mA (x2 Channels) | - | 10 V | 30 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
TLE2161IPIC OPAMP JFET 1 CIRCUIT 8DIP |
1,188 |
|
Datasheet | Excalibur™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 10V/µs | 6.4 MHz | - | 4 pA | 600 µV | 290µA | 80 mA | 7 V | 36 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 8-PDIP |
|
LPV321M7XIC OPAMP GP 1 CIRCUIT SC70-5 |
2,344 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.1V/µs | 152 kHz | - | 2 nA | 1.5 mV | 9µA | 60 mA | 2.7 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
|
RC4558PSRIC OPAMP GP 2 CIRCUIT 8SO |
3,926 |
|
Datasheet | - | 8-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Differential | 1.7V/µs | 3 MHz | - | 150 nA | 500 µV | 2.5mA (x2 Channels) | 10 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
LM224DRG3IC OPAMP GP 4 CIRCUIT 14SOIC |
2,337 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 30 V | -25°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
TL322IPIC OPAMP GP 2 CIRCUIT 8DIP |
24,760 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 0.6V/µs | 1 MHz | - | 200 nA | 2 mV | 1.4mA (x2 Channels) | 10 mA | 5 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
TL052CPSIC OPAMP JFET 2 CIRCUIT 8SO |
1,200 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.209", 5.30mm Width) | Bulk | Active | J-FET | 2 | - | 20.7V/µs | 3 MHz | - | 30 pA | 650 µV | 4.8mA (x2 Channels) | 80 mA | 10 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SO |
|
|
TL072ACPSRIC OPAMP JFET 2 CIRCUIT 8SO |
3,243 |
|
Datasheet | - | 8-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 2 | - | 13V/µs | 3 MHz | - | 65 pA | 3 mV | 1.4mA (x2 Channels) | - | 10 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SO |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
