Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV2463IDGSIC OPAMP GP 2 CIRCUIT 10VSSOP |
1,039 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA (x2 Channels) | 80 mA | 2.7 V | 6 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 10-VSSOP |
|
INA310A4IDGKR-4-V TO 110-V, 1.3-MHZ, ULTRA-PR |
2,527 |
|
Datasheet | Zero-Drift | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 2.5V/µs | - | 900 kHz | 20 µA | 5 µV | 1.6mA | - | 2.7 V | 20 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
|
INA310A5IDGKR-4-V TO 110-V, 1.3-MHZ, ULTRA-PR |
1,462 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 2.5V/µs | - | 900 kHz | 20 µA | 2 µV | 1.6mA | - | 2.7 V | 20 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
OPA2354AIDDARG3IC OPAMP VFB 2 CIRC 8SOPWRPAD |
2,495 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS, Voltage Feedback | 2 | Rail-to-Rail | 150V/µs | 100 MHz | 250 MHz | 3 pA | 2 mV | 4.9mA (x2 Channels) | 100 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO PowerPad |
|
TLV2464INIC OPAMP GP 4 CIRCUIT 14DIP |
421 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA (x4 Channels) | 80 mA | 2.7 V | 6 V | -40°C ~ 125°C (TA) | - | - | Through Hole | 14-PDIP |
|
INA190A5QDCKRQ1IC CURR SENSE 1 CIRCUIT SC70-6 |
2,752 |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Active | Current Sense | 1 | Rail-to-Rail | 0.3V/µs | 27 kHz | - | 500 pA | 3 µV | 48µA | - | 1.7 V | 5.5 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | SC-70-6 |
|
|
OPA2392DGKRDual, low-offset 10UV, low-noi |
2,193 |
|
Datasheet | OPAx392 | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Push-Pull, Rail-to-Rail | 4.5V/µs | 13 MHz | - | 0.01 pA | 1 µV | 1.22mA (x2 Channels) | 65 mA | 1.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
TLV2254AIPWIC OPAMP GP 4 CIRCUIT 14TSSOP |
354 |
|
Datasheet | LinCMOS™ | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 0.12V/µs | 200 kHz | - | 1 pA | 200 µV | 140µA (x4 Channels) | 50 mA | 2.7 V | 8 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
|
OPA2863AIDSNRDUAL, HIGH-PRECISION, LOW-POWER, |
3,927 |
|
Datasheet | - | 10-UFDFN Exposed Pad | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Push-Pull, Rail-to-Rail | 100V/µs | 50 MHz | 105 MHz | 300 nA | 10 µV | 800µA (x2 Channels) | 45 mA | 2.7 V | 12.6 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 10-SON (3x3) |
|
|
OPA2863ADRDUAL, HIGH-PRECISION, LOW-POWER, |
2,975 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Push-Pull, Rail-to-Rail | 100V/µs | 50 MHz | 105 MHz | 300 nA | 10 µV | 800µA (x2 Channels) | 45 mA | 2.7 V | 12.6 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
