Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV4111IDRIC OPAMP GP 1 CIRCUIT 8SOIC |
2,136 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 1.57V/µs | 2.7 MHz | - | 0.3 pA | 175 µV | 700µA | 320 mA | 2.5 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OPA728AIDRBTIC OPAMP GP 1 CIRCUIT 8SON |
360 |
|
Datasheet | e-trim™ | 8-VDFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 30V/µs | 20 MHz | - | 85 pA | 15 µV | 4.3mA | 40 mA | 4 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SON (3x3) |
|
OPA2373AIDGSRIC CMOS 2 CIRCUIT 10VSSOP |
5,000 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 5V/µs | 6.5 MHz | - | 0.5 pA | 1 mV | 585µA (x2 Channels) | 5 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-VSSOP |
|
OPA2990SIRUGRIC OPAMP |
2,925 |
|
Datasheet | - | 10-XFQFN | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 4.5V/µs | 1.1 MHz | - | 10 pA | 300 µV | 120µA (x2 Channels) | 80 mA | 2.7 V | 40 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 10-X2QFN (2x1.5) |
|
OPA4374AIDIC CMOS 4 CIRCUIT 14SOIC |
400 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 4 | Rail-to-Rail | 5V/µs | 6.5 MHz | - | 0.5 pA | 1 mV | 585µA (x4 Channels) | 5 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
|
OPA347UAIC OPAMP GP 1 CIRCUIT 8SOIC |
500 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.17V/µs | 350 kHz | - | 0.5 pA | 2 mV | 20µA | 17 mA | 2.3 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
LMV932Q1MAX/NOPBIC OPAMP GP 2 CIRCUIT 8SOIC |
2,490 |
|
Datasheet | LMV® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.42V/µs | 1.5 MHz | - | 14 nA | 1 mV | 116µA (x2 Channels) | 100 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
TLC2252TDA1IC OPAMP GP 2 CIRCUIT DIE |
442 |
|
Datasheet | LinCMOS™ | Die | Tray | Active | General Purpose | 2 | Rail-to-Rail | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | Die |
|
|
TLV9162QPWRQ1AUTOMOTIVE, DUAL, 16-V 11-MHZ RA |
3,000 |
|
Datasheet | TLV916x-Q1 | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 33V/µs | 11 MHz | - | 10 pA | 210 mV | 2.4mA (x2 Channels) | 73 mA | 2.7 V | 16 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-TSSOP |
|
|
TLV9162QDGKRQ1AUTOMOTIVE, DUAL, 16-V 11-MHZ RA |
2,129 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 33V/µs | 11 MHz | - | 10 pA | 210 µV | 2.4mA (x2 Channels) | 73 mA | 2.7 V | 16 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-VSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
