Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4041IDIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
199 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 400V/µs | - | 165 MHz | 2.5 µA | 2.5 mV | 8mA | - | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2677IDDAIC OPAMP CFA 2 CIRC 8SOPWRPAD |
172 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 2 | - | 2000V/µs | 2 GHz | 250 MHz | 10 µA | 800 µV | 18mA (x2 Channels) | 500 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
|
TLE2144CNIC OPAMP GP 4 CIRCUIT 14DIP |
134 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 45V/µs | 5.9 MHz | - | 700 nA | 290 µV | 6.9mA (x4 Channels) | 50 mA | 4 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
LMH6551MA/NOPBIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
269 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 1 | Differential | 2400V/µs | - | 370 MHz | 4 µA | 500 µV | 12.5mA | 65 mA | 3 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
INA2132U/2K5IC INST AMP 2 CIRCUIT 14SOIC |
2,217 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 2 | - | 0.1V/µs | - | 300 kHz | - | 75 µV | 160µA | 12 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
INA2126EA/250IC INST AMP 2 CIRCUIT 16SSOP |
225 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 2 | - | 0.4V/µs | - | 200 kHz | 10 nA | 50 µV | 175µA (x2 Channels) | 10 mA | 2.7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 16-SSOP |
|
OPA2703EA/2K5IC CMOS 2 CIRCUIT 8VSSOP |
2,470 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.6V/µs | 1 MHz | - | 1 pA | 160 µV | 160µA (x2 Channels) | 10 mA | 4 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
|
OPA2704EA/250IC CMOS 2 CIRCUIT 8VSSOP |
1,030 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 3V/µs | 3 MHz | - | 1 pA | 160 µV | 160µA (x2 Channels) | 10 mA | 4 V | 12 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
TLE2144IDWIC OPAMP GP 4 CIRCUIT 16SOIC |
285 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 45V/µs | 5.9 MHz | - | 700 nA | 290 µV | 6.9mA (x4 Channels) | 50 mA | 4 V | 44 V | -40°C ~ 105°C | - | - | Surface Mount | 16-SOIC |
|
TLE2142IPIC OPAMP GP 2 CIRCUIT 8DIP |
373 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 45V/µs | 5.9 MHz | - | 700 nA | 290 µV | 6.9mA (x2 Channels) | 50 mA | 4 V | 44 V | -40°C ~ 105°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
