Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA2191A1IYBJRIC CURR SENSE 2 CIRCUIT 12DSBGA |
352 |
|
Datasheet | - | 12-WFBGA, DSBGA | Tape & Reel (TR) | Active | Current Sense | 2 | Rail-to-Rail | 0.3V/µs | 45 kHz | - | 100 nA | 2.5 µV | 86µA | - | 1.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 12-DSBGA |
|
OPA2626IDGKTIC OPAMP VFB 2 CIRCUIT 8VSSOP |
6,555 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Rail-to-Rail | 115V/µs | 120 MHz | - | 2 µA | 15 µV | 2mA (x2 Channels) | 130 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
OPA2889IDIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
304 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 250V/µs | 75 MHz | 115 MHz | 150 nA | 1.5 mV | 920µA (x2 Channels) | 60 mA | 2.6 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2889IDGSTIC OPAMP VFB 2 CIRCUIT 10VSSOP |
1,230 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | - | 250V/µs | 75 MHz | 115 MHz | 150 nA | 1.5 mV | 920µA (x2 Channels) | 60 mA | 2.6 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 10-VSSOP |
|
TLV2474AINIC CMOS 4 CIRCUIT 14DIP |
107 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 4 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA (x4 Channels) | 35 mA | 2.7 V | 6 V | -40°C ~ 125°C (TA) | - | - | Through Hole | 14-PDIP |
|
LMP2234AMTE/NOPBIC OPAMP GP 4 CIRCUIT 14TSSOP |
461 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Differential, Rail-to-Rail | 0.048V/µs | 130 kHz | - | 0.02 pA | 10 µV | 36µA (x4 Channels) | 30 mA | 1.6 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
.jpg "OPA2836IRMCT")
|
OPA2836IRMCTIC OPAMP VFB 2 CIRCUIT 10UQFN |
6,913 |
|
Datasheet | - | 10-UFQFN | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Differential, Rail-to-Rail | 580V/µs | 118 MHz | 205 MHz | 650 nA | 65 µV | 1mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 10-UQFN (2x2) |
|
|
OPA2836IDIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
379 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 2 | Differential, Rail-to-Rail | 560V/µs | 118 MHz | 205 MHz | 650 nA | 65 µV | 1mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
THS4061CDIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
2,864 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 400V/µs | - | 180 MHz | 3 µA | 2.5 mV | 7.8mA | 115 mA | 9 V | 33 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
THS4567IRUNRIC OPAMP DIFF 1 CIRCUIT 10WQFN |
2,035 |
|
Datasheet | - | 10-WFQFN | Tape & Reel (TR) | Active | Differential | 1 | Differential, Rail-to-Rail | 500V/µs | 220 MHz | 43 MHz | 20 pA | 200 µV | 1.9mA | 20 mA | 3.3 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 10-WQFN (2x2) |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
