Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA126EA/250IC INST AMP 1 CIRCUIT 8VSSOP |
2,062 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 0.4V/µs | - | 200 kHz | 10 nA | 150 µV | 175µA | 10 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
OPA861IDBVTIC OPAMP TRANSCOND 1CIRC SOT23-6 |
405 |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | Transconductance | 1 | - | 900V/µs | 80 MHz | - | 1 µA | 3 mV | 5.4mA | 15 mA | 4 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
OPA830IDIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
359 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 600V/µs | 110 MHz | 310 MHz | 5 µA | 1.5 mV | 4.25mA | 85 mA | 2.8 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TL288CPIC OPAMP JFET 2 CIRCUIT 8DIP |
3,517 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 2 | - | 18V/µs | 3 MHz | - | 30 pA | 100 µV | 2.6mA (x2 Channels) | 80 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
TLE2074ACNIC OPAMP JFET 4 CIRCUIT 14DIP |
266 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 45V/µs | 10 MHz | - | 1 pA | 250 µV | 730µA (x4 Channels) | 48 mA | 4.5 V | 38 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
TLV4120IDGNRIC OPAMP GP 1 CIRCUIT 8HVSSOP |
431 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 1 | Differential | 1.57V/µs | 2.4 MHz | - | 0.3 pA | 100 µV | 1.4mA | 320 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
|
TLC2274AINIC OPAMP GP 4 CIRCUIT 14DIP |
235 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 4.8mA (x4 Channels) | 50 mA | 4.4 V | 16 V | -40°C ~ 125°C (TA) | - | - | Through Hole | 14-PDIP |
|
OPA140ATDD1IC OPAMP JFET 1 CIRCUIT DIE |
504 |
|
Datasheet | - | Die | Tray | Active | J-FET | 1 | Rail-to-Rail | - | 11 MHz | - | - | - | - | - | 4.5 V | 36 V | - | - | - | - | Die |
|
|
INA240A3EDRQ1IC CURRENT SENSE 1 CIRCUIT 8SOIC |
5,840 |
|
Datasheet | Zero-Drift | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 2V/µs | - | 400 kHz | 90 µA | 5 µV | 1.8mA | - | 2.7 V | 5.5 V | -40°C ~ 150°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
|
LMP8602QMA/NOPBIC CURRENT SENSE 1 CIRCUIT 8SOIC |
190 |
|
Datasheet | LMP® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Current Sense | 1 | - | 0.83V/µs | 60 kHz | - | 0.04 pA | 150 µV | 1.1mA | 48 mA | 3 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
