Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA293A3IDBVTIC CURR SENSE 1 CIRCUIT SOT23-5 |
409 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 2.5V/µs | - | 1 MHz | 20 µA | 10 µV | 1.5mA | - | 2.7 V | 20 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
INA293A4IDBVTIC CURR SENSE 1 CIRCUIT SOT23-5 |
240 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 2.5V/µs | - | 900 kHz | 20 µA | 5 µV | 1.5mA | - | 2.7 V | 20 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
TLV2772CPIC CMOS 2 CIRCUIT 8DIP |
447 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 500 µV | 1mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
INA156EA/250IC INST AMP 1 CIRCUIT 8VSSOP |
2,060 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | Rail-to-Rail | 6.5V/µs | - | 550 kHz | 1 pA | 2.5 mV | 1.8mA | 50 mA | 2.7 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
TLV2404IDRIC OPAMP GP 4 CIRCUIT 14SOIC |
4,582 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.0025V/µs | 5.5 kHz | - | 100 pA | 390 µV | 900nA (x4 Channels) | 200 µA | 2.5 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
TLE2142QDRQ1IC OPAMP GP 2 CIRCUIT 8SOIC |
3,843 |
|
Datasheet | Excalibur™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 45V/µs | 5.9 MHz | - | 700 nA | 290 µV | 6.9mA (x2 Channels) | 50 mA | 4 V | 44 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
|
INA152EA/250IC OPAMP DIFF 1 CIRCUIT 8VSSOP |
680 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Differential | 1 | - | 0.4V/µs | - | 800 kHz | - | 250 µV | 500µA | 12 mA | 2.7 V | 20 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
INA2331AIPWTIC INST AMP 2 CIRCUIT 14TSSOP |
636 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Instrumentation | 2 | Rail-to-Rail | 5V/µs | - | 2 MHz | 0.5 pA | 1 mV | - | 48 mA | 2.5 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
ONET8501PBRGTRIC LIMITING 1 CIRCUIT 16VQFN |
5,425 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Limiting | 1 | - | - | - | 9 GHz | - | - | 50mA | - | 2.95 V | 3.6 V | -40°C ~ 100°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
|
OPA810IDTIC OPAMP JFET 1 CIRCUIT 8SOIC |
417 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | Rail-to-Rail | 192V/µs | 70 MHz | 140 MHz | 2 pA | 100 µV | 3.7mA | 100 mA | 4.75 V | 27 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
